Adj Pixie Driver 2000 handleiding
Handleiding
Je bekijkt pagina 13 van 26
13
RGB PIXEL CONTROL
This feature gives the user the ability to adjust the RGB Pixel Control conguration of the device.
Individual pixels may be controlled independently for ner control over the resolution of the device’s
lighting display. Alternately, multiple individual pixels may be grouped together under a common set
of control channels in order to reduce the number of required control channels. This also reduces the
eective pixel count for each xture, thereby allowing an increased number of xtures to be oper-
ated o of the same driver port (see the Driver Output Limitations section). The downside to this is
the reduced resolution of the lighting display.
For example, if the user is setting up a Pixie Strip 30 containing thirty (30) individual pixels, the nest
level of control would be 1x30, which signies 30 groups of 1 pixel each. In a 1x30 pixel control con-
guration, each of the 30 pixels is controlled independently, giving the lighting display a ne degree
of resolution. However, each individual pixel requires 3 control channels (Red, Green, and Blue), and
therefore 90 control channels are required to operate the device in this conguration, in addition to
the need for the driver port to have free capacity to control at least 30 pixels.
If using fewer control channels or less driver port pixel capacity is desired, the user may opt for a dif-
ferent pixel control conguration, such as 2x15. This conguration separates the lighting display into
15 groups, each containing 2 individual pixels, with each group being controlled by a single set of
control channels. Thus, the requirement for number of control channels is reduced to 45 (15 groups
each requiring 3 control channels for Red, Green, and Blue). Moreover, each group of 2 pixels can
now be treated eectively as a single large pixel, reducing the required driver port free pixel capac-
ity to just 15 pixels. This is particularly useful when operating in Art-Net or sACN mode, where
each driver port can accommodate a relatively limited number of pixels
PIXEL CONTROL MODES, PIXIE STRIP MODELS
Pixie Strip 30 Pixie Strip 60 Pixie Strip 120
2 x 15 2 x 30 2 x 60
3 x 10 3 x 20 3 x 40
5 x 6 4 x 15 4 x 30
6 x 5 5 x 12 5 x 24
10 x 3 6 x 10 6 x 20
15 x 2 10 x 6 8 x 15
30 x 1 12 x 5 10 x 12
15 x 4 15 x 8
20 x 3 20 x 6
30 x 2 24 x 5
60 x 1 30 x 4
40 x 3
60 x 2
120 x 1
Bekijk gratis de handleiding van Adj Pixie Driver 2000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Adj |
| Model | Pixie Driver 2000 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3129 MB |
