Adj Inno Spot LED WiFLY handleiding

Niet gecategoriseerd

Adj

14 pagina's

PDF beschikbaar

Handleiding

ADJ Products, LLC - www.adj.com - Inno Spot LED WiFly Instruction Manual Page 16 ADJ Products, LLC - www.adj.com - Inno Spot LED WiFly Instruction Manual Page 17

Operating Modes: The Inno Spot LED WiFly can operate in

three different modes. In each mode you can run the fixture as

a stand alone fixute or in a master/slave confiugration. This next

section will detail the differences in the operating modes.

• Sound Active mode -

The fixture will react to sound, chasing through the built-in programs.

• Show mode -

The fixture will run one of four shows that you choose.

• DMX control mode -

This function will allow you to control each individual fixtures traits

with a standard DMX-512 controller such as the Elation® Show

Designer.

™

Master-Slave Operation This function will allow you to link up to 16

units together and operate without a controller. The units will be sound

activated. In Master-Slave operation one unit will act as the controlling

unit and the others will react to the controlling units programs. Any unit

can act as a Master or as a Slave.

1. Using approved DMX data cables, daisy chain your units togeth-

er via the XLR connector on the rear of the units. Remember the

Male XLR connector is the input and the Female XLR connector

is the output. The rst unit in the chain (master) will use the female

XLR connector only - The last unit in the chain will use the male

XLR connector only. For longer cable runs we suggest a termina-

tor at the last fixture.

2. On the Master unit find your desired show and set that show by

pressing the ENTER button.

3. On the slave units press the MENU button until “SLND” is dis-

played, and Press ENTER. Choose either “SL 1” or “SL 2” and

press ENTER. See page 12 for more info.

4. The slave units will now follow the Master unit.

Universal DMX Control: This function allows you to use a Elation®

universal DMX-512 controller to control the chases and patterns,

dimmer and strobe. A DMX controller allows you to create unique

programs tailored to your individual needs.

1. The Inno Spot LED WiFly is a ten DMX channel DMX fixture. See

pages 21-22 for detailed description of the DMX values and traits.

Inno Spot LED WiFly Operation

Inno Spot LED WiFly System Menu

To enter the home adjustment submenu, press the ENTER button for

at least 5 seconds. In this submenu you are able to adjust the origi-

nal position of the gobo wheel, tilt (Tilt home position) and pan (Pan

home position).

OPAN - Adjustment of the tilt home position.

1. Press the ENTER button for at least 5 seconds, then press the UP

or DOWN buttons so that “OPAN” is displayed, press ENTER.

2. Use the UP and DOWN buttons to make your adjustments, and

then press ENTER to conrm. Press the MENU button for one second

to exit.

OTIL - Adjustment of the tilt home position.

1. Press the ENTER button for at least 5 seconds, then press the UP

or DOWN buttons so that “OTIL” is displayed, press ENTER.

2. Use the UP and DOWN buttons to make your adjustments, and

then press ENTER to conrm. Press the MENU button for one second

to exit.

OGOB - Adjustment of the gobo wheel.

1. Press the ENTER button for at least 5 seconds, then press the UP

or DOWN buttons so that “OGOB” is displayed, press ENTER.

2. Use the UP and DOWN buttons to make your adjustments, and

then press ENTER to conrm. Press the MENU button for one second

to exit.

Bekijk gratis de handleiding van Adj Inno Spot LED WiFLY, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.