Adj FREQ 16 Strobe handleiding

Niet gecategoriseerd

Adj

10 pagina's

PDF beschikbaar

Handleiding

FREQ 16 Strobe System Menu

©American DJ Supply® - www.americandj.com - FREQ 16 Strobe Instruction Manual Page 7 ©American DJ Supply® - www.americandj.com - FREQ 16 Strobe Instruction Manual Page 8

FREQ 16 Strobe System Menu

ADDR - DMX Address Setting via control board -

1. Press the MENU button until “ADDR” is displayed, press

ENTER.

2. “X” will now be displayed, “X” represents the displayed address.

Press the UP or DOWN buttons to nd your desired address.

3. Press ENTER to conrm, then connect your DMX controller.

NOTE: If after you connect your DMX controller the unit does not

fall into DMX mode, press and hold the MENU button for at least

3 seconds.

CHND - This will let select your desired DMX channel

mode.

1. Press the either the MENU button until “CHND” is displayed,

press ENTER. Either “1CH”, “2CH”, “16CH” or “18CH” will be

displayed

2. Press the UP or DOWN buttons to nd your desired DMX

channel mode and press ENTER to conm and exit.

SLND - This will let you set unit as a master or slave in a

master/slave conguration.

1. Press the MENU button until “SLND” is displayed, press

ENTER. Either “MAST”, “SL 1” or “SL 2” will be displayed.

2. Press the UP or DOWN buttons until your desired setting is

displayed, press ENTER to conm.

NOTE: In a Master/Slave conguration you can set one xture

to Slave 1 (SL 1) and then set the next xture to Slave 2 (SL 2),

in doing this the xtures will now have contrast movement to

each other.

Bekijk gratis de handleiding van Adj FREQ 16 Strobe, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.