Adj Focus Spot Two handleiding

Niet gecategoriseerd

Adj

18 pagina's

PDF beschikbaar

Handleiding

ADJ Products, LLC - www.adj.com - Focus Spot Two Instruction Manual Page 30 ADJ Products, LLC - www.adj.com - Focus Spot Two Instruction Manual Page 31

Screw

Scr e w

Focus Spot Two Removing the Head Casing

1. Unscrew the single screw 2. Flip the top cover back

3. Remove the lens

4. Unscrew the 4 screws

located on the other side

The gobo’s in this unit are interchangable. Please be very care-

ful when replacing the gobo.

Caution! Never open the unit when in use. Always disconnect

the main power before attempting to change the gobos.

1. To change a gobo, rotate the moving head so that the UV

lens is located on top. Unscrew the single middle screw. See

instruction number 1 on the next page.

2. Once you loosen the single screw you are able to swing the

head back. See instruction number 2 on the next page. You

will now be able to access the gobo wheel. Turn the wheel

with your hand until you come across the gobo you would

like to change.

3. To remove the gobo holder gently pull the gobo holder to-

wards the front of the unit and slide it up and out.

4. Gently and carefully remove the retainer ring. After the re-

tainer ring is removed, carefully remove the gobo.

5. Change the gobo and replace the retainer ring. Carefully slide

the gobo holder back into the housing slot.

6. Reassemble the unit.

Focus Spot Two Changing the Gobo

Bekijk gratis de handleiding van Adj Focus Spot Two, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.