Adj Element QAIP handleiding
Handleiding
Je bekijkt pagina 12 van 29
ADJ Products, LLC - www.adj.com - Element QAIP User Manual Page 11
Element QAIP DMX Control
DMX Mode:
Operating through a DMX controller gives the user the freedom to create their own programs tai-
lored to their own individual needs. To control this unit in DMX mode, your contoller must be
connected to a Wifly TranCeiver. This is a Wifly unit only. The Element QAIP has 5 DMX modes:
4 channel mode, 5 channel mode, 6 channel mode, 9 channel mode, and 10 channel mode. See
pages 12-14 for each mode’s DMX traits.
1. This function will allow you to control each individual fixtures traits with a standard DMX 512 controller.
2. To run your fixture in DMX mode press the MODE button until “d.XXX” is displayed. “XXX” repre
sents
the current displayed DMX address. Use the UP or DOWN buttons to select your desired DMX
address, then press the SETUP button to select your DMX Channel mode.
3. Use the UP or DOWN buttons to scroll through the DMX Channel modes. The Channel modes
are listed below:
• To run the 4 Channel Mode, press the MODE button until “Ch04” is displayed.
• To run the 5 Channel Mode, press the MODE button until “Ch05” is displayed.
• To run the 6 Channel Mode, press the MODE button until “Ch06” is displayed.
• To run the 9 Channel Mode, press the MODE button until “Ch09” is displayed.
• To run the 10 Channel Mode, press the MODE button until “Ch10” is displayed.
4. Please see pages 12-14 for DMX values and traits.
Bekijk gratis de handleiding van Adj Element QAIP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Adj |
| Model | Element QAIP |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3574 MB |
