Adj ElectraPix Bar 16 handleiding
Handleiding
Je bekijkt pagina 23 van 46
23
ACCESSORY INSTALLATION - BATTERY CHARGER
To charge the internal battery, carefully plug the Charging Base into the Charge Port, located on the
bottom of the xture next to the control panel, and plug the Power Supply into the Charging Base. If the
battery is completely discharged, Charge Time is 5.5-hours for a full charge.
Charging Base
Charge Port
Power Supply
Disconnect the unit from the charger once the battery is fully charged. Doing so reduces the risk
of overcharging the battery, which can shorten the service life of the battery.
Note that the charging components are NOT protected against the intrusion of dust and/or
water, and are intended for use only in a dry indoor environment. Do NOT expose to rain or
moisture. When charging is complete, always seal the charging port with the included plug to
maintain the xture’s IP rating.
Bekijk gratis de handleiding van Adj ElectraPix Bar 16, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Adj |
| Model | ElectraPix Bar 16 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5669 MB |
