Adj Boom Box FX1 handleiding
Handleiding
Je bekijkt pagina 10 van 14
ADJ Products, LLC - www.adj.com - Boom Box FX1 Instruction Manual Page 18 ADJ Products, LLC - www.adj.com - Boom Box FX1 Instruction Manual Page 19
Boom Box FX1
Master-Slave Set Up
With this feature you can connect the xtures to one another
using the IEC input and output sockets. The quantity that can be
connected is 8 xtures maximum @ 120V, and 16 xtures @ 230V.
After the maximum amount of xtures has been reached, you
will need to use a new power outlet. They must be the same x-
tures. DO NOT mix xtures.
Boom Box FX1 Power Cord Daisy Chain
Master-Slave Operation This function will allow you to link up to
16 units together and operate without a controller. In a Master-Slave
set up, one unit will act as the controlling unit and the others will react
to the controlling units programs. Any unit can act as a Master or as a
Slave.
1. Using approved DMX data cables, daisy chain your units togeth-
er via the XLR connector on the rear of the units. Remember the
Male XLR connector is the input and the Female XLR connector
is the output. The rst unit in the chain (master) will use the female
XLR connector only - The last unit in the chain will use the male
XLR connector only. For longer cable runs we suggest a termina-
tor at the last fixture.
2. On the Master unit press the MENU button until “SLND” is dis-
played, and press ENTER. Use the UP and DOWN buttons to
scroll to the “MAST” setting and press ENTER.
3. After setting the Master unit to the master setting find and set
your desired operating mode.
4. On the slave units press the MENU button until “SLND” is dis-
played, and press ENTER. Choose either “SL 1” or “SL 2” and
press ENTER. See page 13 for more info.
5. The slave units will now follow the Master unit.
Universal DMX Control: This function allows you to use a univer-
sal DMX-512 controller to control the patterns, rotation and strobing.
A DMX controller allows you to create unique programs tailored to
your individual needs.
1. The Boom Box FX1 is a 2 DMX channel modes; a 3 channel
mode and 21 channel mode. See pages 21-24 for detailed
description of the DMX values and traits.
2. To control your fixture in DMX mode, follow the set-up procedures
on pages 7-9 as well as the set-up specifications that are
included with your DMX controller.
3. Follow the instructions on page 13 to select your desired DMX
channel mode and set the DMX address.
4. For longer cable runs (more than a 100 feet) use a terminator on
the last fixture.
5. For help operating in DMX mode consult the manual included
with your DMX controller.
Sound Active Mode: This mode allows a single unit or several units
linked together, to run to the beat of the music.
1. Press the MENU button until “Soun” is displayed, and press
ENTER.
2. Press the UP or DOWN buttons to either activate sound active
mode or deactivate, and press ENTER. The unit will now run to
the beat of the music.
3. The sound sensitivity can be adjusted by pressing the MENU
button until “Sens” is displayed, and then press ENTER. Use the
UP or DOWN buttons to adjust the sound sensitivity, 0 being the
least sensitive, and 100 being the most sensitive.
Show Mode: This mode allows a single unit or several units linked
together, to run 1 of 9 built-in shows.
1. Press the MENU button until “Shnd” is displayed, and press
ENTER.
2. Press the UP or DOWN buttons to nd your desired show and
press ENTER. The unit will now run your chosen built-in program.
Boom Box FX1 Operation
Bekijk gratis de handleiding van Adj Boom Box FX1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Adj |
| Model | Boom Box FX1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2093 MB |
