Adj Asteroid 1200 handleiding
Handleiding
Je bekijkt pagina 17 van 28
ADJ Products, LLC - www.adj.com - Asteroid 1200 Instruction Manual Page 32
ADJ Products, LLC - www.adj.com - Asteroid 1200 Instruction Manual Page 33
3. Press UP or DOWN buttons, until “Feedback” is displayed, and
press ENTER.
4. Either “O” or “On” will be displayed, use the UP and DOWN but-
tons to toggle between.
5. Press ENTER to conrm your selection or press MODE to exit.
Movement Speed - With this function you can set the pan and tilt
movement speed.
1. Press the MODE button to access the main menu. Press the UP or
DOWN buttons so that “Function” is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “Status” is displayed, press
ENTER.
3. Press UP or DOWN buttons, until “Move. Speed” is displayed,
and press ENTER.
4. Either “Speed 1”, “Speed 2”, “Speed 3” or “Speed 4” will be dis-
played, use the UP and DOWN buttons to toggle between.
5. Press ENTER to conrm your selection or press MODE to exit.
Mic Sensitivity - With this function you can set the microphone
sensitivity. The default setting is 70%. You can adjust the sensitivity
between 0%-99%
1. Press the MODE button to access the main menu. Press the UP or
DOWN buttons so that “Function” is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “Status ” is displayed, press
ENTER.
3. Press UP or DOWN buttons, until “Mic. Sens” is displayed, and
press ENTER.
4. The current mic sensitivity setting will be displayed, use the UP
and DOWN buttons to adjust the sensitivity between 0%-99%.
5. Press ENTER to conrm your selection or press MODE to exit.
Asteroid 1200 System Menu
Asteroid 1200 System Menu
Stand By - With this function the LEDs and step motors will power
o if there is no DMX signal within 15 mins (factory defualt). Once it
receives a DMX signal, the xture will reset itself.
1. Press the MODE button to access the main menu. Press the UP or
DOWN buttons so that “Function” is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “Status” is displayed, press
ENTER.
3. Press UP or DOWN buttons, until “Stand By” is displayed, and
press ENTER.
4. The current stand by setting will be displayed, use the UP and
DOWN buttons to adjust the hibernation period between 01M-99M or
“O”.
5. Press ENTER to conrm your selection or press MODE to exit.
Fixture ID
Password - With this function you can enter the RDM password so
that you can access and change the RDM ID number.
1. Press the MODE button to access the main menu. Press the UP or
DOWN buttons so that “Function” is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “Fixture ID” is displayed,
press ENTER.
3. Press UP or DOWN buttons, until “Password” is displayed, and
press ENTER.
4. The “Password” is 050.
5. Press ENTER or press MODE to exit.
RDM PID - RDM stands for “Remote Device Management”. This
feature lets you control every aspect of your xture remotely from an
RDM controller. Manual settings like adjusting the DMX address are
no longer needed. This is especially useful when the unit is installed
Bekijk gratis de handleiding van Adj Asteroid 1200, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Adj |
| Model | Asteroid 1200 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3753 MB |
