Adj Asteroid 1200 handleiding
Handleiding
Je bekijkt pagina 16 van 28
ADJ Products, LLC - www.adj.com - Asteroid 1200 Instruction Manual Page 31
ADJ Products, LLC - www.adj.com - Asteroid 1200 Instruction Manual Page 30
5. Press ENTER to conrm your selection or press MODE to exit.
Tilt Invert - With this function you can reverse the left head Tilt
movement. This function is used with DMX mode.
1. Press the MODE button to access the main menu. Press the UP or
DOWN buttons so that “Function” is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “Status” is displayed, press
ENTER.
3. Press UP or DOWN buttons, until “Tilt Invert” is displayed, and
press ENTER.
4. Either “O” or “On” will be displayed, use the UP and DOWN but-
tons to toggle between.
5. Press ENTER to conrm your selection or press MODE to exit.
Pan Degree - With this function you can change the pan degree from
630 to 540. This function is used with DMX mode.
1. Press the MODE button to access the main menu. Press the UP or
DOWN buttons so that “Function” is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “Status” is displayed, press
ENTER.
3. Press UP or DOWN buttons, until “Pan Degree” is displayed, and
press ENTER.
4. Either “540” or “630” will be displayed, use the UP and DOWN
buttons to toggle between.
5. Press ENTER to conrm your selection or press MODE to exit.
Feedback - With this function, you have the pan and tilt postion
feedback while out of step or not feedback while out of step.
1. Press the MODE button to access the main menu. Press the UP or
DOWN buttons so that “Function” is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “Status” is displayed, press
ENTER.
Asteroid 1200 System Menu Asteroid 1200 System Menu
the address that is currently assingned to the unit. Then set
Channel 1’s value to “7”, Channel 2’s value to “7”, and Chan-
nel 3’s value to “57”. Wait 20 seconds and the address should
change on the unit to “57”.
2nD EXAMPLE: If you want the address to be 420, you must
rst set the address that is currently assingned to the unit. If
you want the set the address to 420, set Channel 1’s value to
“7”, Channel 2’s value to “8”, and Channel 3’s to “164”. (256 +
164 = 420).
No DMX Mode - With this function if the DMX signal is suddenly lost,
the unit will automatically go into 1 of 3 modes.
1. Press the MODE button to access the main menu. Press the UP or
DOWN buttons so that “Function” is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “Status” is displayed, press
ENTER.
3. Press UP or DOWN buttons, until “No DMX Mode” is displayed,
and press ENTER.
4. Either “Hold” (Last DMX setting), “Blackout”, “Sound” (Sound
Active), or “Auto” (Auto Program) will be displayed, use the UP and
DOWN buttons to toggle between.
5. Press ENTER to conrm your selection or press MODE to exit.
Pan Invert - With this function you can reverse the Pan movement.
1. Press the MODE button to access the main menu. Press the UP or
DOWN buttons so that “Function” is highlighted, then press ENTER.
This function is used with DMX mode.
2. Press the UP or DOWN buttons until “Status” is displayed, press
ENTER.
3. Press UP or DOWN buttons, until “Pan Invert” is displayed, and
press ENTER.
4. Either “O” or “On” will be displayed, use the UP and DOWN but-
tons to toggle between.
Bekijk gratis de handleiding van Adj Asteroid 1200, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Adj |
| Model | Asteroid 1200 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3753 MB |
