Adder View Matrix C110 handleiding
Handleiding
Je bekijkt pagina 42 van 84
41
INSTALLATIONCONFIGURATIONOPERATION
FURTHER
INFORMATION
INDEX
Log Settings
This page provides numerous key diagnostic log settings.
Capture diagnostics to download - (Only shown when viewing this
page using a PC browser). Request generation of a diagnostics dump le.
This will then be downloaded by the host computer’s browser, this is
an encrypted diagnostics le which can be used by technical support to
diagnose and x an issue.
Remote Support - When using the Adder remote server, this option
determines which port will be used. Multiple options are offered in case
one or more ports are blocked by your rewall. When the Enable button
is clicked, it will indicate the password to be used.
Logging Severity Level - Denes the level of messages that will be
logged (according to RFC5424). Choosing levels 6 (Informational) or 7
(Debug) will cause larger numbers of lesser events to also be logged, with
a potential impact to overall performance. These levels should only be
used if working with the support team to diagnose a specic issue.
Remote Logging Enabled - Tick to send log les to the chosen
Remote Logging Address.
Remote Logging Address - Enter a valid IP address for a syslog server
on the local network where status logs can be sent.
Log File - If viewing this page using a browser: Click to download the log
le to the host computer’s browser. If viewing this page via the OSD, the log
will be shown as a scrollable list.
Ping Test - Provides a quick and easy way to check the link status to an
USR. You can specify either an IP address or choose the device from a list.
Click the Start button to begin; a summary of the results will be displayed.
CAM - Diagnostics and Statistics
Basic Graph
This page shows a real time graph with the following entries:
Network Statistics
This page allows you to view current communication statistics and also
to create graphs in real time.
Capture and Graph Statistics - When ticked, the page will create a
real time graph plotting Received Bytes alongside Received Packets.
After Capture and Graph Statistics is enabled, the Show Legend checkbox
will show all other items that can be included on the plot. Click an item
to tick and include it.
Video Port Status and Statistics
This page provides wide ranging information for support purposes.
Audio Port Status and Statistics
This page provides wide ranging information for support purposes.
USB Port Status and Statistics
This page provides wide ranging information for support purposes.
• Received and transmitted bit rates - the values of these
correspond to the bandwidth axis on the left.
• Frame rate - values are labeled when they change and correspond to
the axis on the right.
• Codec - these represent the compression used: 1 is better than 4.
To get here
You can access this page in two ways:
1 On the console keyboard attached to the USR, access the OSD by
pressing CTRL + ALT + C or tap the touchscreen icon. The
Preset Selection page will be displayed.
2 Click the icon in the top right corner.
3 Click the CAMs option and then click the icon for the
required CAM.
4 If necessary, click the Diagnostics link.
OR
1 Connect a computer to the same network as the CAM.
2 Run a web browser and enter the IP address of the CAM:
https://169.254.1.33 (this is the default address).
3 Click the icon in the top right corner.
4 If necessary, click the Diagnostics link.
Bekijk gratis de handleiding van Adder View Matrix C110, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Adder |
| Model | View Matrix C110 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 16799 MB |
