Adder View Matrix C110 handleiding

84 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 35 van 84
34
INSTALLATIONCONFIGURATIONOPERATION
FURTHER
INFORMATION
INDEX
USR - System
Software and System Operations
This page contains various indications and options related to the internal
software of the unit.
Note: The highlighted (and colored) entry is the version of software currently
running.
Preferred Software Version - The software version the device will
boot into upon a reboot.
Recovery Software Version - The software version the device will
boot into if placed into recovery mode.
Alternate Software Version - The other (backup) version of software
the device has available.
Reboot Device - Click the Reboot button to Reboot the device.
Restore Default Settings - Click the Restore button to restore the
device to factory default settings.
Switch Software Versions - Click to switch to the listed ‘Alternative
Software Version’.
Upgrade Device - If viewing this page using a browser: Allows you to
upgrade the rmware either from a trusted URL or from a locally stored
le. Use the eld to dene the source and then click the Upgrade button.
To get here
You can access this page in two ways:
1 On the console keyboard attached to the USR, access the OSD by
pressing CTRL + ALT + C or tap the touchscreen icon. The
Preset Selection page will be displayed.
2 Click the icon in the top right corner.
3 If necessary, click the System link.
OR
1 Connect a computer to the same network as the USR.
2 Run a web browser and enter the IP address of the USR:
https://169.254.1.32 (this is the default address for port 1).
(Note: the second USR network port defaults to https://169.254.1.43).
3 Click the icon in the top right corner.
4 If necessary, click the System link.
Switching to an alternate software version
If required you can instruct the USR to use a previous (backup) version
of its operating software (rmware).
To switch to an alternate software version
1 Within the OSD or using a web browser, access the System page for
the USR (as detailed above left).
2 Click the Switch button in the lower right corner of the page to
display the following popup:
3 Click the Switch button to conrm.
4 After a short delay, reboot the USR to utilize the alternate software.

Bekijk gratis de handleiding van Adder View Matrix C110, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkAdder
ModelView Matrix C110
CategorieNiet gecategoriseerd
TaalNederlands
Grootte16799 MB