Adder View Matrix C110 handleiding

84 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 20 van 84
19
INSTALLATIONCONFIGURATIONOPERATION
FURTHER
INFORMATION
INDEX
USR - PERFORMING A MANUAL FACTORY RESET
A factory reset returns a ADDERView Matrix USR to its default conguration.
To perform a manual factory reset
1 Power on the ADDERView Matrix USR.
2 Use a long narrow implement (e.g. a
straightened-out paper clip) to press-and-
hold the recessed reset button on the front
panel for roughly ten seconds, until the status
indicator turns blue (Note: alternating red/green
indications will occur during the ten second period
while the button is still pressed).
3 Release the reset switch. The indicator will
change to red for a short while (less than
ten seconds) and then back to blue while the
ADDERView Matrix USR performs the reset
and should then change to an alternative color,
usually orange initially, signifying that the
operation is complete.
Note: If you are performing a factory reset and intend to disconnect the power immediately
after the reset, you must wait at least 30 seconds after you have released the reset button
for it to complete the process.
MATRIX
®
ADDERView
USR - PLACING THE DEVICE INTO RECOVERY MODE
Recovery mode may allow an ADDERView Matrix USR to be diagnosed or upgraded in
the event of the main mode being non-operational.
To boot the device into recovery mode
1 Power on the ADDERView Matrix USR.
2 Use a long narrow implement (e.g. a
straightened-out paper clip) to press-and-hold
the recessed reset button on the front panel
(for less than ten seconds) until the status
indicator starts alternating red/green. Note: A
solid blue indication will occur after the ten second
period.
3 Release the reset switch. The indicator will
change to red for a short while (less than
ten seconds) and then alternating red/green
signifying that the device is in recovery mode.
Note: If the indicator turns blue, then a factory reset
has been performed instead, the device will not be
in recovery mode and the operation will need to be
attempted again.
4 If necessary, perform a software upgrade or reinstate a backup software version - see
page 34.
MATRIX
®
ADDERView

Bekijk gratis de handleiding van Adder View Matrix C110, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkAdder
ModelView Matrix C110
CategorieNiet gecategoriseerd
TaalNederlands
Grootte16799 MB