ADB Eurodim Twin Tech handleiding
Handleiding
Je bekijkt pagina 33 van 96
EURODIM TWIN TECH
Page 31 sur 92
Example of a circuit’s output voltage:
Entry
DMX channel value (50%)
120 V law
Mult. fact.: 50%
230 V
115 V
57 V
29 V
Use the wheel in order to rapidly move to the row of a circuit. The row selected is highlighted.
To attribute a law, position on a row:
− Touch the zone where the current law is displayed, making the table of available laws appear,
− Touch to select the law from the table; the law selected is highlighted,
− For the user laws, first select the number (between 1 and 6) using the + and - keys
− Touch the highlighted zone to validate and attribute to the circuit.
To attribute a MODE:
− Touch the zone where the current law is displayed, making the table of available laws appear,
− Touch to select the MODE (BYPASS or SWITCH or DIM) from the table; the MODE selected is
highlighted,
− Touch the highlighted zone to validate and attribute to the circuit.
To attribute a multiplying factor, position on a row:
− Touch the zone where the multiplying factor is displayed in order to edit the value,
− Enter the value using the numeric keyboard (between 0 and 100%)
− Touch the zone where the new value is displayed in order to validate.
Important: after validation, this action has an immediate effect on the light dimming.
Note: If the value attributed is 100%, the screen displays "FF". Any value entered that is beyond 100 is
limited to 100 (FF).
If the MODE attributed to a circuit is the SWITCH or BYPASS, the multiplying factor is forced to 100%
(FF) by the software.
Bekijk gratis de handleiding van ADB Eurodim Twin Tech, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ADB |
| Model | Eurodim Twin Tech |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 19177 MB |
