Acti PPSW-0100 handleiding
Handleiding
Je bekijkt pagina 10 van 28
10
Per 10/100Mbps Port
LED Color Function
LNK/ACT Green
Light: Indicates the link through that port is successfully
established at 10/100Mbps full duplex mode.
Blink Slowly: Indicates the link through that port is
successfully established at 10/100Mbps
half duplex mode.
Blink Fast: Indicates that the switch is actively sending
or receiving data over that port.
PoE Orange
Light: Indicates the port is providing 48V (FGSD-910P) /
56V (FGSD-910HP) DC in-line power.
Per 10/100/1000Mbps Port
LED Color Function
Speed Green
Light: Indicates the link through that port is successfully
established at 1000Mbps.
Blink Slowly: Indicates the link through that port is
successfully established at 100Mbps.
Off: Indicates the link through that port is successfully
established at 10Mbps.
LNK/ACT Green
Light: Indicates the link through that port is successfully
established.
Blink: Indicates that the switch is actively sending or
receiving data over that port.
2.2 Rear Panel
The rear panel of the PoE Ethernet Switch indicates an AC inlet power socket,
which accepts input power from 100 to 240V AC, 50-60Hz, 2A (FGSD-910P) or
100 to 240V AC, 50-60Hz, 2.5A (FGSD-910HP).
100~240V AC
50/60Hz, 2A max.
Figure 2-3: FGSD-910P Switch Rear Panel
Bekijk gratis de handleiding van Acti PPSW-0100, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Acti |
| Model | PPSW-0100 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2776 MB |
