ACR ELT 1000 handleiding
Handleiding
Je bekijkt pagina 12 van 65
ARTEX PRODUCTS / ACR ELECTRONICS, INC.
DESCRIPTION, OPERATION, INSTALLATION AND MAINTENANCE MANUAL
ELT 1000 (P/N: A3-06-2749-1)
Y1-03-0259 Rev. AC Company Confidential 25-62-33 Page 12 of 65
INTRODUCTION
1. Manual Usage
A. General
1) This manual describes the operation, installation and maintenance of the ARTEX ELT 1000 emergency
locator transmitter (ELT). The information is provided to ensure initial and continued airworthiness.
Information presented in this manual is accurate at the time of printing, but is subject to change. Refer to
the ARTEX web site at www.acrartex.com for the latest information and any updates to this manual.
2) Information on the COSPAS-SARSAT emergency locator beacon registration requirements and procedures is
provided in Appendix A – ELT Registration on page 64.
3) Web links provided in this manual were accurate at time of printing but may be subject to change.
4) ACR Electronics, Inc. reserves the right to add approved components to the ELT system; including but not
limited to antennas, remote switches and coaxial cables. These changes are approved as “minor changes”
pursuant to FAR 21, Subpart O for TSO holders.
5) Regulatory references contained herein are generally confined to Web links provided in this manual and
were accurate at time of printing, but may be subject to change. Consult your national aviation authority
for applicable requirements.
B. Application
1) This manual constitutes supporting data/documentation for the ARTEX ELT 1000, including:
a) Description and Operation
b) Test and Fault Isolation (includes inspection criteria)
c) Removal
d) Installation
e) Registration
f) Illustrated Parts List
2) In the United States, the ARTEX ELT 1000 must be installed and maintained in accordance with the
requirements herein, 14 CFR, FAR Parts 43, -91 and other airworthiness requirements, as applicable.
3) In Canada, the ARTEX ELT 1000 must be installed and maintained in accordance with the requirements
herein as well as Canadian Aviation Regulations (CAR); Part V, Paragraph 551.104 as well as other CAR
airworthiness requirements, as applicable.
4) ARTEX ELT 1000 installation and maintenance in all other countries must comply with the requirements
herein as well as applicable national airworthiness requirements. In the absence of any inspection
requirements from national regulatory authorities, operators should follow the annual inspection procedures
outlined in Inspection and Test Regulatory Requirements, subsection United States on page 24 of this
manual.
5) The accessories (i.e. remote switch and antennas) referenced in this manual are those most commonly
associated with the ARTEX ELT 1000. Other options, such as an alternative remote switch configuration or
a navigation interface, should be installed and maintained in accordance with instructions specific to the
accessory.
NOTE: Contact ACR Electronics, Inc. for optional accessories approved for use with ARTEX ELT 1000s.
6) To ensure proper operation, only parts listed in the Illustrated Parts List of this manual or those
recommended by ACR Electronics, Inc. may be used as replacement parts for the ARTEX ELT 1000.
Bekijk gratis de handleiding van ACR ELT 1000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ACR |
| Model | ELT 1000 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9637 MB |
