Accucold AWC2PB handleiding
Handleiding
Je bekijkt pagina 11 van 16
10
Reducing the Set Point Temperature
The operating temperature is factory-set to 130°F (54.4°C), but you can reduce this Set Point by following
this procedure:
1. Press and release the SET button. The display temperature will flash.
2. Press e
ither the UP or DOWN arrow on the control panel to reach the desired set point temperature.
OPERATION-Digital Temperature Controller
This section explains how to operate your unit. For more detailed instructions on changing the parameters of
the control panel.
Adjusting the Operating Temperature
Heating LED:
The heating LED turns on during the heating process and turns off when the device reaches a
constant temperature.
Parameter Setup
1. Press and hold the SET button for 6 seconds to enter the parameter settings (the display will flash PAS).
2. Enter the password (factory set to 15).
3. Press
the SET button (the display will show E1, E2...~CF, PAS in sequence).
4. Press the ▲ or ▼ button, the value of parameter will be displayed and can be modified and stored.
If no more buttons are pressed within 6 seconds, it will exit and store
the new value.
Note: To adjust the parameter values, you must enter the correct password in the inner parameter menu (displayed
as PAS). If the wrong password is entered, the system will exit the parameter modification screen and the set
temperature adjustment will remain the same. If the password is forgotten, please contact Technical
Support for assistance at 800-932-4267 (Ext. 513) between 9:00 AM and 5:00 PM ET.
Increasing the Set Point Temperature
The temperature range for this unit is factory set from 90°F - 130°F (32.2°C - 54.4°C).
NOTE:
To set the temperature above 130°F, please contact Technical Support for
assistance at 800-932-4267 (Ext. 513)
between 9:00 AM and 5:00 PM ET
Bekijk gratis de handleiding van Accucold AWC2PB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Accucold |
| Model | AWC2PB |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1896 MB |
