Abus Smartvest Pro APP45000 handleiding
Handleiding
Je bekijkt pagina 40 van 116
| 40
Testing the device electronics
Regularly check the functionality of the smoke detector by pressing
the Test button. The warning tone signals and the red “ALARM” LED
flashes.
This does not indicate that smoke is present in the air in the room;
it is a confirmation that the smoke detector is functioning properly
It is essential that you test the function of the detector after
installation. A regular test is also recommended.
Keep the device at arm’s length to protect your hearing.
To carry out the test, press the test button for just 3-5 seconds.
Holding the Test button down for 15 seconds will reset the smoke
detector to the factory default settings. This will cause it to lose its
connection with Smartvest Pro and, where applicable, other
smoke detectors.
Low battery
If the detector’s battery charge falls below a certain value, the
detector signals this with an acoustic warning tone (every
40 seconds). If this warning signal sounds, the detector batteries
must be immediately replaced with new batteries. Pressing the
Test button mutes the fault signal for 8 hours.
From the time of the first battery warning signal, the detector is
still operable and completely functional for at least 30 more days.
Bekijk gratis de handleiding van Abus Smartvest Pro APP45000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Abus |
| Model | Smartvest Pro APP45000 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12469 MB |
