Abus Smartvest Pro APP45000 handleiding
Handleiding
Je bekijkt pagina 39 van 116
| 39
Where the smoke alarms should not be installed:
8.6 Displays and functions
Normal state
In the normal state, the red control LED under the housing cover
flashes once every 40 seconds and signals that the detector is
ready for operation.
Alarm state: Smoke
If smoke is detected, a loud, pulsing alarm tone sounds and the
red LED flashes at the same time at short intervals. In this case,
proceed as described in the “What to do in the event of an alarm”
section.
Alarm tone 0.5 s – pause 0.5 s – alarm tone 0.5 s – pause 0.5 s –
alarm tone 0.5 s – pause 1.5 s
Alarm state: Heat
If heat is detected, a loud, pulsing alarm tone sounds and the red
LED flashes at the same time at short intervals. In this case,
proceed as described in the “What to do in the event of an alarm”
section.
Alarm tone 0.2 s – pause 0.1 s
Outdoors (use only in closed rooms)
In rooms where the alarm could be triggered by disturbance variables (steam,
condensation, “normal” smoke, vapour, dust, dirt or grease)
Next to an air extractor or similar ventilation opening (draughts)
In areas in which the temperature can fall below 0°C or rise to over 40°C
On non-load-bearing surfaces that are not suitable for dowel installation due to their
properties
Bekijk gratis de handleiding van Abus Smartvest Pro APP45000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Abus |
| Model | Smartvest Pro APP45000 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12469 MB |
