Abus Smartvest Pro APP45000 handleiding
Handleiding
Je bekijkt pagina 27 van 116
| 27
5. FUEM45000 Smartvest Pro wireless vibration detector
5.1 Product description
1 Vibration detector
Detector for detecting vibrations
2 LED
Blue, for signalling detection
3 Tamper contact
Tamper contact for alerting in the event of unwanted removal
4 Battery compartment
1x 3V button battery (CR2032) for power supply
The Smartvest Pro app warns you when the battery is low. Follow
the instructions in the app.
5.2 Notes
The wireless vibration detector is designed for indoor use only. For further
information, please refer to the safety instructions relating to installation location
and operating environment.
To ensure trouble-free operation, the detector must NOT be installed:
• close to the ground
• in the vicinity of large metal structures
• up to 1 metre away from power lines or gas pipes
• near electronic devices or radios
• on moving elements
• upside down
The vibration detector triggers in the event of vibrations that typically arise during a
break-in attempt, such as battering, drilling, sawing, or using objects for leverage.
The 3D acceleration sensor analyses these vibrations and sends an alarm signal to
the alarm panel depending on the set level of sensitivity. The detector can be used
to monitor both xed and moving objects.
Please note further information on the wireless vibration detector:
• Managing and adding components: Page 76
• Technical data: Page 113
Bekijk gratis de handleiding van Abus Smartvest Pro APP45000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Abus |
| Model | Smartvest Pro APP45000 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12469 MB |
