2N Telecommunications EasyGate handleiding
Handleiding
Je bekijkt pagina 29 van 69
Table of Parameters 3.2
29
3.2 Table of Parameters
All programmable parameters are listed in this section. Each parameter is
accompanied with the unit used, function number (if available) for programming via a
telephone line, description of EasyGate's behavior, setting options, setting step and
default (initialization) value.
Telephone Line Parameters
Dialing parameters
Type of dialing Function No.: -
Select the dialing type to be received by EasyGate from the PBX or telephone set.
EasyGate accepts only the selected type of dialing, ignoring the others.
Setting options: DTMF -EasyGate receives tone dialing only.
Pulse -EasyGate receives pulse dialing only
Default setting: DTMF
Time to dial [s] Function No.: -
Timeout during which EasyGate waits for further digits to be dialed. It starts to
establish connection when this timeout passes.
Setting options: 1-15 s
Setting step: 1 s
Default setting: 5 s
Minimal On Hook [ms] Function No.: -
The minimum line current discontinuation that EasyGate evaluates as hang-up.
Setting options: 100-1500 ms
Setting step: 100 ms
Default setting: 500 ms
Beep after dialing end Function No.: -
Select a beep to signal the end of dialing (beginning of outgoing call establishing).
Setting options: YES/NO
Default setting: YES
Bekijk gratis de handleiding van 2N Telecommunications EasyGate, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | 2N Telecommunications |
| Model | EasyGate |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6292 MB |
Caratteristiche Prodotto
| Markt positionering | Bedrijf |
| Ingangsspanning | 12 V |
| Soort apparaat | Gateway voor mobiele netwerken |
| Datanetwerk | GPRS, GSM |
| GSM bands ondersteund | 850,900,1800,1900 MHz |
