2N Telecommunications EasyGate Pro Handleiding (79 Pagina's)

Handleiding

Voice function

4.1

49

Tariff pulses 16 or 12 kHz

EasyGate has tariff pulse transmitter. You can use tariff pulses for outgoing call

pricing. EasyGate offer pseudotariff only – tariff metering doesn’t correspond to real

price of call, tariff pulses are transmitted according to programmed parameters and

call duration. You must program specific parameters in call table to set tariff metering

for different prefixes of dialed numbers.

You can also program EasyGate to transmit tariff pulses as call connect/disconnect

signaling if your PBX cannot receive telephone line polarity change signaling.

Configuration of network services

EasyGate provides some of network services to improve possibility of usage. The

configuration is done by standard Star-Hash codes you can know from mobile phones.

To configure these services:

1. Hook off the telephone, you can hear the dial tone.

2. Enter the Star-Hash code described below.

3. Wait for information tone. You may wait about 3 seconds.

4. Hook on.

Information tones:

Confirmation - OK:

n Confirms that the service was configured correctly.

Confirmation - bad:

n Service was not correctly configured

n Service isn’t activated by your provider

Confirmation - service activated:

n Confirms that the service was configured correctly and the service is

activated.

Confirmation - service deactivated:

n Confirms that the service was configured correctly and the service is

deactivated.

Bekijk gratis de handleiding van 2N Telecommunications EasyGate Pro, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.