Zoom G2Nu handleiding
Handleiding
Je bekijkt pagina 26 van 56
26
ZOOM G2Nu/G2.1Nu
1. Connect a foot switch (FS01) to the
CONTROL IN jack.
2. Press the USB/GLOBAL key to light it and
open the GLOBAL menu.
3. Use the effect type [▼]/[▲] keys to select
"FootSwitch."
4. Turn Parameter knob 1 to set the foot
switch function.
The foot switch can be set to one of the following
functions.
BP/MT Set the unit to bypass/mute.
BANK UP Increase the bank number by one
with each press of the foot switch.
RHYTHM TurnRhythmmodeON/OFF.
BPM TAP Set the tempo used for the rhythm,
looper and effect by pressing the
foot switch repeatedly at the
desired tempo.
DL TAP Set the Time parameter of the
DELAYmodulebypressingthe
foot switch repeatedly.
DLHOLD Turn hold delay ON/OFF. Hold
delay is a function that allows the
delay sound to be repeated without
decay(seetheillustrationbelow).
DL MUTE TurntheDELAYmodule'sinput
mute ON/OFF.
TouseDLTAP,DLHOLDorDLMUTE,you
mustturntheDELAYmoduleON.
5. After making the setting, press the USB/
GLOBAL key again to turn its light out.
HINT
The foot switch function setting affects all
patches. Moreover, this setting is saved even
when the power is turned OFF.
UsingaFootSwitch
YoucanconnectanoptionalfootswitchtotheCONTROLINjack,anduseittocontroladditionalsettingsoftheunit
with your feet, for example, by changing banks and operating effects.
Sound
source
Delay sound
Press the foot switch
Hold delay
Hold
Press again
HINT
Foot switch function
Bekijk gratis de handleiding van Zoom G2Nu, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Zoom |
| Model | G2Nu |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10057 MB |
