Zoom 3000B handleiding
Handleiding
Je bekijkt pagina 9 van 60
Introducing the 3000B
5 ●
The detailed settings that determine the sound are called "parameters". The 3000B has three different
kinds of parameters:
The effect types and effect parameters available for a given effect module are indicated on the panel of
the 3000B.
■ Mode
Operation of the 3000B can be divided into five different states, called "modes". These modes are listed
below.
• Play mode
•••••••• In this mode, you select patches and use the effects for playing your instrument.
In Play mode, you can also temporarily switch effects off, and you can use the auto tuner function.
• Manual mode
••••• In this mode, you can switch effect modules on and off individually, using the
top panel switches of the 3000B. This is also suitable for use during a performance.
• Edit mode
•••••••• In this mode, the effect parameters of the currently selected patch can be edited
(changed) by the user. This allows you to create your own patches.
• Store mode
••••••• This mode serves for storing patches in memory and for copying patches from
one location in memory to another.
• Special mode
••••• This mode serves for initializing the 3000B. USER group settings and patches
can be selectively returned to the factory default.
■ RTM
The 3000B incorporates a so-called RTM (real-time modulation) function which lets the user change
effect parameters or volume in real time, using the FUNCTION switch or the optional remote pedal
RP01. This makes it possible to adjust for example overdrive distortion or reverb mix during a
performance, creating a wide expression range. The parameters to be affected by RTM and the range of
the change can be set for each patch individually.
ADVANCED BASS EFFECTS PROCESSOR
1.
COMP
2.
COMP2
3.LIMITER
4.
DUAL COMP
5.
DEFRET
6.
SLAP
Sens
/
Sens 1
A
tk
/
Sens 2
P
eak
/
X-F
T
one
/
Bal
Level
VOLUME RTM
G
ain
/
Mid Enh
Level
D.Level
Cabinet
1:DIST-WAH
2:WAH-DIST
DIST
/
AMP RTM
D
pt
/
F1
/
500Hz
Spd
/
G1
/
250Hz
Color
/
F2
/
100Hz
Mode
/
G2
/
500Hz
Level
WAH RTM
8
kHz
/
High
/
F1
4
kHz
/
MidF
/
G1
2
kHz
/
MidG
/
F2
1kH
z
/
Low
/
G2
L
evel
ZNR
F
req
/
Mode
Reso
/
Scale
Decay
/
Atk
D.Level
Level
SYNTH RTM
C
olor
/
Pit
/
Dly
Dpt
/
Sft
/
Mode
Rate
/
Tone
Mix
/
Bal
/
Reso
FUNCTION Mode
EFFECT RTM
D
lyTime
/
RevTime
FineTime
/
DlyMix
FB
/
RevColor
DlyMix
/
RevMix
Patch Level
DLY
/
REV RTM
1.CLN1
3.TE-C
5.OD
7.
FN-D
1.
GRAPHIC
2.3-BAND
3.PARAMETRIC
1-6.
BASS SYNTH
7.
HARMO SYNTH
1.DELAY
2.HALL
4.
EARLY REF
5.DLY
+
REV
3.ROOM
1.CHO
3.PIT
5.
DETUNE
7.
SWEEP
2.FLG
4.P-PIT
6.TRILL
8.RING
2.CLN2
4.SW-C
6.FUZZ
8.AC-D
1.AUTO
3.OCT
5.ENH
7.
GRAPHIC EQ
2.PEDAL
4.
PHASE
6.P-EQ
COMP DIST/AMP WAH EQ SYNTH EFFECT DLY/REV
POSITION
Effect modules
Effect types
Parameters
1– 6
Global parameterPatch parameterEffect parameters
• Effect parameter
Determines the effect intensity or signal flow in an
effect module. Effect parameter settings are stored
as part of each patch.
• Patch parameter
Determines the overall level of a patch, Zoom
Noise Reduction (ZNR) settings, and other aspects
affecting the entire patch. Patch parameters are
stored as part of each patch.
• Global parameter
This kind of parameter affects all patches in the
same way. For example, the FUNCTION Mode
parameter that determines how the FUNCTION
switch works is a global parameter. This setting is
retained also when switching patches, until the unit
is turned off. When wishing to preserve the global
parameter setting, any patch of the USER group
should be selected and stored before turning the
unit off.
Bekijk gratis de handleiding van Zoom 3000B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Zoom |
| Model | 3000B |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12758 MB |
