Zoom 3000B handleiding
Handleiding
Je bekijkt pagina 17 van 60
The current input attenuator setting (-18 to 0) is shown on the display
for about one second.
When the 3000B is in Play mode, the Parameter Select keys serve
to change internal settings of the 3000B or to use the metronome.
Pressing the same Parameter Select key once more returns the unit to
the previous mode.
When a bass guitar with high output is connected, the sound of the
3000B may be distorted due to input overload. In such a case,
reduce the input sensitivity.
These keys serve to adjust the high range, midrange, and low range,
respectively. The current setting (-12 to 0 to +12) is shown on the
display for about one second.
Pressing the same Parameter Select key once more returns the unit to
the previous mode.
• The input sensitivity and tone settings are valid for all patches,
and are maintained also when the unit is switched off.
• The input sensitivity and tone adjustment can be performed also
in Manual mode (page 23).
• In Play mode and Manual mode, if the INPUT ATT, MASTER
HIGH, MASTER MID, or MASTER LOW setting is other than 0,
the respective LED is lit.
• In the Bypass state, the input sensitivity setting is active, but
tone adjustment settings are inactive.
HINTHINT
HINTHINT
HINTHINT
This section describes how to adjust input sensitivity (for matching the 3000B to the output level of the
instrument) and tone (to suit the acoustic requirements of a performance venue).
13 ●
BANK
FUNCTION
VALUE
ADVANCED BASS EFFECTS PROCESSOR
1.
COMP
2.
COMP2
3.LIMITER
4.
DUAL COMP
5.
DEFRET
6.
SLAP
Sens
/
Sens 1
A
tk
/
Sens 2
P
eak
/
X-F
T
one
/
Bal
Level
VOLUME RTM
G
ain
/
Mid Enh
Level
D.Level
Cabinet
1:DIST-WAH
2:WAH-DIST
DIST
/
AMP RTM
D
pt
/
F1
/
500Hz
Spd
/
G1
/
250Hz
Color
/
F2
/
100Hz
Mode
/
G2
/
500Hz
Level
WAH RTM
8
kHz
/
High
/
F1
4
kHz
/
MidF
/
G1
2
kHz
/
MidG
/
F2
1kH
z
/
Low
/
G2
L
evel
ZNR
F
req
/
Mode
Reso
/
Scale
Decay
/
Atk
D.Level
Level
SYNTH RTM
C
olor
/
Pit
/
Dly
Dpt
/
Sft
/
Mode
Rate
/
Tone
Mix
/
Bal
/
Reso
FUNCTION Mode
EFFECT RTM
D
lyTime
/
RevTime
FineTime
/
DlyMix
FB
/
RevColor
DlyMix
/
RevMix
Patch Level
DLY
/
REV RTM
1.CLN1
3.TE-C
5.OD
7.
FN-D
1.
GRAPHIC
2.3-BAND
3.PARAMETRIC
1-6.
BASS SYNTH
7.
HARMO SYNTH
1.DELAY
2.HALL
4.
EARLY REF
5.DLY
+
REV
3.ROOM
1.CHO
3.PIT
5.
DETUNE
7.
SWEEP
2.FLG
4.P-PIT
6.TRILL
8.RING
2.CLN2
4.SW-C
6.FUZZ
8.AC-D
1.AUTO
3.OCT
5.ENH
7.
GRAPHIC EQ
2.PEDAL
4.
PHASE
6.P-EQ
COMP DIST/AMP WAH EQ SYNTH EFFECT DLY/REV
POSITION
FUNCTION MODE
BANK
(
VALUE
)
EDIT
(
CANCEL
)
GROUP STORE
1.BANK DOWN
2.MANUAL
3.HOLD DLY(LONG)
4.HOLD DLY(REAL)
5.DELAY(TAP)
6.BYPASS
7.MUTE
9.RTM
PRESETUSER
(BOTH)
U
P
U O
MASTER LOW
MASTER MID
INPUT ATT
METRO TEMPO
METRO ON
/
OFF
METRO VOL
MASTER HIGH
1
2, 4
3
INPUT ATT
MASTER HIGH
STEP
1
To adjust input sensitivity, press the Parameter Select key marked INPUT ATT in
Play mode or Manual mode.
STEP
2
Adjust the VALUE knob while playing your instrument, to adjust the input
sensitivity.
STEP
3
To adjust tone, press one of the Parameter Select keys marked MASTER HIGH,
MASTER MID, or MASTER LOW.
STEP
4
Adjust the VALUE knob to change the attenuation or boost of the selected
frequency range.
ADVANCED BASS EFFECTS PROCESSOR
Adjusting Input Sensitivity/Tone
Let's Try Out Some Patches (Play Mode Operation)
VALUE
VALUE
Bekijk gratis de handleiding van Zoom 3000B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Zoom |
| Model | 3000B |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12758 MB |
