Zodiac Vortex-Pro VX65 iQ handleiding
Handleiding
Je bekijkt pagina 16 van 36
Using the Control Unit
The control unit can be used to initiate basic cleaning features and to connect the device to home
Wi-Fi. For more information on connecting your cleaner to Wi-Fi functions, see section 5, Installing
iAquaLink
™
.
Wi-Fi to Phone
Button
Dirty Canister
Indicator
Lit when in Wi-Fi to Phone Mode
LED: Direct Connection (RED)
Lit to Conrm Connection.
LEDs: LAN Connection (RED)
WEB Connection (RED)
View Time Remaining
and Error Display
Use to Remove
Cleaner
from Pool
Start/Stop Cleaner
Operation
Select Cleaning Surface
• Floor
• Floor and Wall
• Waterline
Figure 15. Cleaner Control Unit
Start / Stop Cleaning
The factory default cleaning surface setting is Floor and Wall .
Use
to change cleaning surface setting.
Toggle between: Floor Only
, Floor and Wall and Waterline only
With cleaner submerged in the water, press to begin operation.
The control box will display the time remaining for the selected cycle in hours and
minutes.
NOTE: The control box automatically goes into standby mode after 10 minutes and the display screen turns
off. Press any key to exit standby mode and view remaining cycle time. Cleaner will continue to
function in standby mode.
Press to interrupt and cancel an in-progress cleaning cycle.
Page 16
Zodiac
®
VX65iQ Robotic Pool Cleaner
|
Owner's Manual
Bekijk gratis de handleiding van Zodiac Vortex-Pro VX65 iQ, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Zodiac |
| Model | Vortex-Pro VX65 iQ |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4560 MB |
