Zodiac Spabot SB1000 handleiding
Handleiding
Je bekijkt pagina 11 van 12
11
Zodiac
®
Spabot
™
Cordless, Battery-Powered Spa Cleaner
Basic Troubleshooting
Problem Solution
Cleaner does not
turn on
• Low battery. Charge until battery LED is solid green.
• Slide the On / Off button down towards the
symbol to start
the cleaner.
• Overheated. Move cleaner to cooler area. Do not store above
40ºC or in direct sunlight.
Cleaner does not
charge
• No power. Reset GFCI circuit breaker. Plug the charger into a
different outlet.
• Dirty connection. Clear debris from charging port on cleaner.
Cleaner does not
dive -or- does not
move in water
• Trapped air. Hold cleaner under water, tilt and shake to release
air bubbles.
• Filter full / dirty. Empty canister, wash with soapy water and a
soft brush.
• Make sure the pivoting float arm moves freely.
• Manually rotate wheels back and forth to release blockage.
Cleaner does not
climb spa walls -or-
does not reach all
areas
• Filter full / dirty. Empty canister, wash with soapy water and a
soft brush.
• Turn off spa pump and jets while using cleaner.
• Water chemistry imbalance. Consult a spa service
professional.
• Some spa designs may have areas inaccessible to the cleaner.
Lid detaches
unexpectedly
• Reattach lid securely (see step in "Empty the Filter Canister"
section).
• Latch stuck. See latch problem / solutions below.
Latch is difficult to
open -or- does not
stay closed
• Submerge cleaner in water, open and close latch a few times
to rinse out debris.
• Completely dry out cleaner, open and close latch a few times,
blow out debris.
Debris escaping
from filter
• Remove canister, wash with soapy water and a soft brush.
• Make sure canister is seated and oriented properly.
• Ensure there are no rips/tears in the filter canister, replace if
necessary
Cleaner floats to the
surface
• Normal operation. Cleaner stops and floats when the cleaning
cycle is done.
• Normal operation. Cleaner floats periodically during navigation.
Cleaner does notnot
float to the surface
at end of cycle
• Canister full with heavy debris. Empty filter canister.
Flashing red LED
• Blockage detected. Turn off cleaner and remove lid. Clear
debris from exposed moving parts.
NOTE: If a problem persists, please contact your local retailer to request a diagnostic review,
or call 1300 763 021 for technical support.
Bekijk gratis de handleiding van Zodiac Spabot SB1000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Zodiac |
| Model | Spabot SB1000 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1632 MB |
