Zodiac Power Force handleiding

128 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 22 van 128
3
the high and low pressure switches must be checked to ensure that they are securely
fastened to the cooling circuit and that they cut o the electrical circuit when tripped.
During maintenance work, ensure there are no traces of corrosion or oil around the
cooling components.
Before beginning work on the cooling circuit, stop the appliance and wait for a few
minutes before ng the temperature and pressure sensors. Some elements such
as the compressor and piping may reach temperatures in excess of 100°C and high
pressures with the consequent risk of severe burns.
TROUBLESHOOTING
All brazing must be carried out by qualied brazers.
Replacement pipes must always be made of copper in compliance with standard NF
EN 12735-1.
Leak detecon; pressure test:
- never use oxygen or dry air (risk of re or explosion)
- use dry nitrogen or the mixture of nitrogen and refrigerant indicated on the
informaon plate,
- the test pressure for both the high and low pressure circuits must not exceed 42 bar
(for R410A) in cases where the appliance is equipped with the oponal pressure
gauge.
The high pressure circuit pipes are made of copper and have a diameter equal to or
greater than 1’’5/8. A cercate as indicated in §2.1 in compliance with standard
NF EN 10204 must be requested from the supplier and led in the installaon’s
technical le.
Technical data relave to the safety requirements of the various applicable direcves
are indicated on the informaon plate. All this informaon must be recorded in the
appliance’s installaon manual, which must be kept in its technical le: model, code,
serial number, maximum and minimum OT, OP, year of manufacture, CE marking,
manufacturers address, coolant and weight, electrical parameters, thermo-dynamic
and acousc performance.
Recycling
This symbol is required by the European direcve DEEE 2012/19/EU (direcve on waste electrical and
electronic equipment) and means that your appliance must not be thrown into a normal bin. It will be
selecvely collected for the purpose of reuse, recycling or creang value. If it contains any substances that
may be harmful to the environment, these will be eliminated or neutralised. Contact your retailer for recycling
informaon.
EN

Bekijk gratis de handleiding van Zodiac Power Force, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkZodiac
ModelPower Force
CategorieNiet gecategoriseerd
TaalNederlands
Grootte28463 MB