Zodiac LM3-40 handleiding
Handleiding
Je bekijkt pagina 15 van 20
15
Adding Stabilizer (Cyanuric Acid) to the Pool
Chlorine stabilizer is essential to prolong the life of chlorine in pool water. It acts as a sun-screen for the
chlorine, preventing the sun from destroying it too quickly.
The recommended stabilizer level is between 40-100 ppm and will vary depending on geographic climate.
This chart is for general reference only. Consult a local pool professional for the optimum level and always
add stabilizer according to manufacturer’s instructions.
Stabilizer Requirements
Pounds and (KG) of stabilizer (Cyanuric Acid) needed to raise level to 80 PPM
Manually Cleaning the Cell
The self cleaning electrodes in the cell may occasionally require manual cleaning to remove scale build-up
resulting from very hard water or continuously high pH conditions that can occur with new plaster finishes.
To clean:
1. Turn off filter pump and
chlorinator, and open air
relief valve to release
pressure in the system.
Close necessary valves.
2. Twist off the blue cap.
3. Unplug the output cable.
4. Unscrew locking ring.
5. Remove electrode.
Cell Assembly
Cell Housing
and Shrouds
Electrode
Output
Cab
le
Locking
Ring
Blue
Cap
Bekijk gratis de handleiding van Zodiac LM3-40, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Zodiac |
| Model | LM3-40 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1921 MB |
