Zodiac GenSalt OT handleiding
Handleiding
Je bekijkt pagina 30 van 60

28
4.2 I Adding salt
Every appliance must be operated with a minimum recommended salt level, see “1.2.1 Salt water chlorinator”.
In order for the chlorinator appliance to operate properly, and to protect the equipment, we
recommend using salt (sodium chloride) as per standard EN 16401.
4.2.1 Determining the quan ty of salt to be used when installing the appliance
Example:
• Appliance opera ng with 4 grams of salt/litre of water.
• 50m
3
pool.
The formula:
50m
3
x 4 grams of salt = 200 kg of salt to be added to the water.
4.2.2 Rou ne analyses
Check the salt level quarterly and readjust the quan ty of salt present where necessary.
==> Method for adding salt to the water
• Start the lter pump to cause the water in the pool to circulate.
• If the appliance has already been installed, switch it o .
• Move around the perimeter of the pool while pouring the required quan ty of salt into the water to help
dissolu on. Add the salt in stages. It is easier to add salt to make up for an insuffi cient quan ty that to
dilute the salt present to make up for an excessive quan ty.
• Operate the lter pump for 24 hours.
• A er 24 hours have passed, check that the salinity level in the pool is correct, i.e. 4g/litre (in the example
cited).
• If the salt level is correct and the appliance has already been installed, switch it on then adjust the desired
level of chlorine produc on, see "5.4.2 Adjus ng chlorine produc on".
Do not add salt directly to the skimmer.
The appliance must only be switched on when the salt has completely dissolved in the pool.
Bekijk gratis de handleiding van Zodiac GenSalt OT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
Merk | Zodiac |
Model | GenSalt OT |
Categorie | Niet gecategoriseerd |
Taal | Nederlands |
Grootte | 20621 MB |