Zodiac eXPERT handleiding
Handleiding
Je bekijkt pagina 17 van 43
16
2.5.2. Connecng the control box
• Before beginning, disconnect all potenal power supplies to the appliance.
• Check that the cables used comply with the intended use and with the regulaons in force.
• Idenfy the connecon point for each desired funcon at the boom of the control box:
pH
ORP
Electrolysis cell
pH sensor (BNC connector)*
ORP sensor (BNC connector)*
ON/OFF switch
Power supply (230V, 50-60Hz) controlled by lter pump relay (ON when pump is running)
Fuse
pH pump*
Available space for Modbus cable if controlled with Fluidra Connect automaon (NN app)
Flow switch
(*depending on model)
2.6 I Connecng auxiliary devices
2.6.1. Open the control box
• Use a screwdriver to pry open the clips at the top of the front cover to dislodge it (see gure ).
• Using a No. 3 Allen key, unscrew the 8 screws that secure the screen (see gure ).
• Open the box and carefully posion the screen (see gure ).
EN
Bekijk gratis de handleiding van Zodiac eXPERT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Zodiac |
| Model | eXPERT |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 14801 MB |
