Zmodo ZMD-DT-SJN6 handleiding
Handleiding
Je bekijkt pagina 17 van 60
Connecting your DVR
1. Connect your analog cameras directly to the system with the correct cables as
shown. For detailed instruction, please refer to 3.2 Camera Installation.
2. Connect your display to the appropriate display input. For detailed instruction,
please refer to 3.1 DVR Installation – Connecting the Display.
3. Connect your system to a nearby power outlet with the provided power adapter as
shown.
4. Connect your USB mouse to the corresponding input as shown.
5. Connect your DVR system to your wireless router with the provided Ethernet cable
as shown.
Connecting the Display
This DVR can support up to three di erent display options: HDMI, VGA and BNC. The
following steps provide instructions that will ensure that you have a working HDMI or
VGA connection:
1. Make sure that you have the proper equipment. You will need a display and a
corresponding video cable. Monitors will typically support VGA cables, high defi nition
televisions will typically support both VGA and HDMI. You may need to purchase a
cable if you do not have one already.
2. Identify your connection type. If you already have the proper equipment, please
identify the type of connection that you will be using. For HDMI connections, we
recommend that you use one of the following brands: Phillips, LG or Samsung.
3. Connect to the corresponding port. Connect one end of the cable to the
corresponding port on the display, and the other end to the corresponding port in the
rear panel of the DVR.
3.6First-time Setup
Bekijk gratis de handleiding van Zmodo ZMD-DT-SJN6, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Zmodo |
| Model | ZMD-DT-SJN6 |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 40351 MB |
