Handleiding
Je bekijkt pagina 41 van 47
37
Troubleshooting
TROUBLESHOOTING
SYMPTOM POSSIBLE CAUSE POSSIBLE SOLUTION
Burner flames are very
large and yellow.
Burner spread ports
are clogged.
Clean burner spread ports
with straightened paperclip,
needle, or wire.
Burner spreads or caps are
not positioned properly.
Remove and carefully re-install
burner spreads and caps.
Appliance is being operated
with the wrong type of gas.
Ensure that the type of appliance
matches the gas supply.
Regulator is not installed, is
faulty, or is set for the wrong
type of gas.
Have a qualified technician
replace regulator or set regulator
for proper gas.
Brass burner(s)
change color
Brass burners naturally
oxidize over time and form
a patina that is a beautiful
deep brass hue. This process
ensures our brass burners
are corrosion resistant and is
not cause for a return.
This is a normal occurrence for
brass burners; no troubleshooting
is required.
“Cracking” or
“popping” sound
is heard coming
from appliance.
This is the sound of metal
heating and cooling.
This is normal for oven operation.
Steam/condensation
is coming from the
back splash oven vent.
Cooking foods high in
moisture or if the ambient
temperature is cold.
Condensate water is a natural
occurrence and is non-corrosive.
Nothing works.
Power supply is
not energized.
Have an electrician check
the power supply, including
the house circuit breaker,
wiring and fuses.
Oven will not heat.
Oven settings are
not corrected.
Adjust temperature, or
rack position.
Foods over-cooked or
under-cooked.
Incorrect cooking
temperature.
Dry or clean igniters. If
problem persists, contact ZLINE
customer service.
Bekijk gratis de handleiding van ZLine CDR36, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ZLine |
| Model | CDR36 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 6828 MB |
