Handleiding
Je bekijkt pagina 39 van 47
35
TROUBLESHOOTING
SYMPTOM POSSIBLE CAUSE POSSIBLE SOLUTION
No ignition spark. Ignition module has failed.
If there is still no spark ignition,
the appliance burners can still be
used if needed. To light them:
1. Holding a lit match to the
flame spreader, push in on
the control knob and turn
counterclockwise to HI.
2. When the flame is burning all
the way round the burner, you
may adjust the heat.
Contact ZLINE customer service.
Igniters spark
continuously after
flame ignition.
Power supply polarity
is reversed.
Contact ZLINE customer service.
Igniters are wet or dirty. Dry or clean igniters.
Burners will not light.
Burner parts or igniters may
be wet, dirty, or misaligned.
Check that the burner
parts are clean, dry, and
correctly assembled.
Spark tip igniters may be
damaged or dirty.
Check that the igniters are clean
and not damaged.
• Please review this list for common troubleshooting tips before calling for service, as this
may save you time and money.
• This list contains frequently encountered problems that are not results of faulty
workmanship or material use.
• Your product may not have some of the features described here.
If a problem cannot be resolved after following the instructions in the
manuals, please contact ZLINE Customer Experience at 1-614-777-5004.
Never attempt to repair or disassemble gas lines, burner spreads, or the
internal electrical wiring of your range.
WARNING
Troubleshooting
Bekijk gratis de handleiding van ZLine CDR36, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ZLine |
| Model | CDR36 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 6828 MB |
