Zipper ZI-STE1000INV handleiding
Handleiding
Je bekijkt pagina 30 van 41
CLEANING, MAINTENANCE, STORAGE, DISPOSAL
ZIPPER MASCHINEN GmbH www.zipper-maschinen.at 30
ZI-STE1000INV
13.8 DC Operation
12V charging function for batteries: Before operation, observe the instructions and notes of the battery
manufacturer. If the indicated charging currents/voltages of the machine are not permissible or not
known for your battery, charge the battery via a battery charger to avoid damage.
• During the direct current operation, switch off the ECO-
mode. To do this, set the switch of the ECO-mode to
the "OFF" position.
• First connected the charging cable to the DC-
connection (2) of the machine.
• Then link the charging cable to the connectors (3) of
the battery.
• Start the machine.
NOTE:
• Do not charge built-in batteries.
• Do not confuse the polarity of the charging cable, oth-
erwise serious results such as damage of the machine
and the battery will be caused.
• When disconnecting the charging cable, start with the
battery first.
• A battery contains acid (electrolyte). Any contact with
the skin or eyes will cause severe burns. Use a mask,
eye protection and protective clothing.
14 CLEANING, MAINTENANCE, STORAGE, DISPOSAL
WARNING
Always stop the machine and let it cool down before carrying out any maintenance work
and secure it against unintentional commissioning.
WARNING:
Lack of maintenance or improper maintenance and repair before using the appliance can result in
serious injury or death! Take therefore the safety rules, operating and maintenance instructions very
seriously.
Repairs only by qualified staff!
NOTE: Prevent unintentional commissioning of the machine by interrupting the fuel supply (ON-OFF
switchin position "OFF") as well as interrupting the ignition spark (remove spark plug cap of spark plug).
14.1 Cleaning
Regular cleaning guarantees the long service life of your machine and is a prerequisite for its safe
operation.
NOTE: The use of solvents, aggressive chemicals or scouring agents can cause damage to the plastic
parts of the machine!
Thus, when cleaning, use only water and, if necessary, mild detergents.
• We recommend cleaning the machine immediately after each use.
• Keep all safety devices, air vents and the motor housing free of dirt and dust as far as possible.
• Wipe the equipment with a moist cloth and some soft soap or blow it with compressed air at
low pressure.
• Take care that any water enters the interior of the machine.
14.2 Maintenance
The machine is low-maintenance and only a few parts need to be serviced. Malfunctions or defects that
could affect your safety must be repaired immediately!
• Before each operation, check the perfect condition of the safety devices.
• Regularly check the perfect and legible condition of the warning and safety labels of the
machine.
• Use only proper and suitable tools.
• Use only original spare parts recommended by the manufacturer.
Bekijk gratis de handleiding van Zipper ZI-STE1000INV, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Zipper |
| Model | ZI-STE1000INV |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9420 MB |
Caratteristiche Prodotto
| Kleur van het product | Black, Green |
| Gewicht | 9900 g |
| Gewicht verpakking | 11500 g |
| Breedte verpakking | 220 mm |
| Diepte verpakking | 415 mm |
