Zipper ZI-STE1000INV handleiding
Handleiding
Je bekijkt pagina 26 van 41
TRANSPORT
ZIPPER MASCHINEN GmbH www.zipper-maschinen.at 26
ZI-STE1000INV
12 TRANSPORT
• Always switch off the engine when transporting and refuelling the machine!
• Ensure that the ON-OFF switch is turned to position “OFF”.
• After operation, allow the machine to cool down for at least 15 minutes.
Transport of the machine in a vehicle:
• Check that no fuel can leak from the tank. Ensure that the fuel filler cap is tightly closed and
that the fuel filler cap lever is in "OFF" position.
• When transporting the machine in a vehicle, ensure that the machine is appropriately
secured! The machine must be carried and transported in an upright position to avoid oil or
fuel leakage.
• If the machine is in a vehicle, do not start the engine. Take the machine out of the vehicle
and run it outdoors only.
• Protect the machine from excessive heat during transport. If the machine remains in a
closed vehicle for a long time, the fuel may ignite due to overheating.
13 OPERATION
Only operate the machine when it is in perfect condition. Before each operation, a visual inspection
of the machine must be carried out.
13.1 Preparation
13.1.1 Checking delivery content
Check the delivery immediately for transport damage and missing parts. Report any damage or
missing parts to your dealer or the shipping company immediately. Visible transport damage must
also be noted immediately on the delivery note in accordance with the provisions of the warranty,
otherwise the goods are deemed to have been properly accepted.
13.1.2 Requirements for the installation site
Place the machine on a level, solid surface to prevent the machine from tipping over.
When dimensioning the required space, take into account that the operation must be possible
without restrictions at all times.
13.2 Checklist before each use
13.2.1 Checking the engine oil level
NOTE
The machine is delivered without engine oil and fuel!
Engine oil 15W40 must be filled before first use!
NOTE
Too low an oil level will damage the engine and shorten the life of the machine. Therefore,
check the engine oil level before every start and top up the engine oil if necessary.
NOTE: Engine does not start with low oil (low oil alarm lights up yellow).
See capture maintenance => engine oil change.
Bekijk gratis de handleiding van Zipper ZI-STE1000INV, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Zipper |
| Model | ZI-STE1000INV |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9420 MB |
Caratteristiche Prodotto
| Kleur van het product | Black, Green |
| Gewicht | 9900 g |
| Gewicht verpakking | 11500 g |
| Breedte verpakking | 220 mm |
| Diepte verpakking | 415 mm |
