Zipper ZI-BSF1500 handleiding
Handleiding
Je bekijkt pagina 23 van 39
SAFETY
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at 23
ZI-BSF1500
• Front cover as cutter protection (4)
12.4 General safety instructions
To avoid malfunctions, damage and health impairments when working with the machine, the
following points must be observed in addition to the general rules for safe working:
• Check the machine for completeness and function before starting. Only use the machine if
the separating and other non-separating protective devices required for machining have
are fitted.
• Make sure that the guards are in good working order and properly maintained.
• Ensure sufficient space around the machine.
• Keep the area around the machine free of obstacles (e.g. dust, chips, cut-off workpiece
parts, etc.).
• Ensure that you are standing securely.
• Check the machine's connections for strength before each use.
• Never leave the machine running unattended. Switch off the machine before leaving the
work area and secure it against unintentional or unauthorised restarting.
• The machine may only be operated, maintained or repaired by persons who are familiar
and who have been informed about the dangers arising from this work.
• Ensure that unauthorized persons keep a safety distance (min. 25 m) from the machine and
keep children away from the machine.
• Always work with care and the necessary caution and never use excessive force.
• Do not overload the machine.
• Hide long hair under hair protection.
• Wear close fitting protective work clothing and suitable protective equipment (eye
protection, face protection, ear protection).
• Never wear loose jewellery, loose clothing or accessories (e.g. tie, scarf).
• Do not work on the machine if you are tired, not concentrated or under the influence of
medication, alcohol or drugs!
• Do not use the machine in areas where vapours of paints, solvents or flammable liquids
represent a potential danger (danger of fire or explosion!).
• Shut down the machine before carrying out adjustment, conversion, cleaning,
maintenance or servicing work, etc. Before starting work on the machine, wait until all tools
and machine parts have come to a complete standstill and secure the machine against
unintentional restarting.
12.5 Special safety instructions for this machine
• Only work on terrain with slopes of up to max. 15°.
• Ensure that there are no stones, wires, toys or similar objects in the working area. These
objects can get caught during milling.
• Protect cars, windows and other objects within 25 m from flying debris.
• Only operate the machine outdoors.
• Ensure that there is sufficient air flow to guarantee cooling of the engine and milling cutter.
• Keep the engine area free of deposits.
• The exhaust fumes from the engine can be extremely hot and cause fires. Keep away from
flammable objects.
• Transport the machine in an upright position to prevent the fuel from running out.
• Only work in sufficient daylight.
Safety instructions for machines with combustion engine
• Do not touch the engine and/or muffler during operation or immediately after switching
off! These areas become hot during operation and can cause burns.
• Do not touch the spark plug connector when the engine is running (electric shock!).
• Do not operate the machine in closed areas or in poorly ventilated rooms unless there is
adequate ventilation through exhaust fans or hoses (Risk of suffocation from carbon
monoxide!).
• Do not smoke while the machine is in operation.
• Do not smoke when refuelling the machine.
• Refuel the machine only in a well ventilated area.
• Do not refuel the machine when the engine is running or the machine is still hot.
• Do not refuel the machine near naked flames.
• Do not spill fuel when refuelling.
• Do not crank a gas flooded engine as long as the spark plug is removed- fuel in the cylinder
sprays out of the spark plug opening.
4
Bekijk gratis de handleiding van Zipper ZI-BSF1500, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Zipper |
| Model | ZI-BSF1500 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9827 MB |
