Zipper ZI-ASA550B handleiding
Handleiding
Je bekijkt pagina 17 van 32
SAFETY
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at 17
ZI-ASA550B
12 SAFETY
This section contains information and important notes on the safe commissioning and handling of
the machine.
For your safety, read this manual carefully before commissioning. This will enable you
to handle the machine safely and thus prevent misunderstandings as well as
personal injury and damage to property. Pay special attention to the symbols and
pictograms used on the machine as well as the safety information and danger
warnings!
12.1 Intended use of the machine
The machine is designed exclusively for the following activities:
Extraction of wood and plastic chips (not for dust) on woodworking machines such as milling
machines, circular table saws and planers within the intended limits.
NOTE
ZIPPER MASCHINEN GmbH assumes no responsibility or warranty for any other use
or use beyond this and for any resulting damage to property or injury.
12.1.1 Technical restrictions
The machine is designed for the work under the following conditions:
Relative humidity
max. 70 %
Temperature (operation)
+5 °C to +40 °C
Temperature (storage)
-25 °C to +55 °C
12.1.2 Prohibited applications / Dangerous misuse
• Vacuuming of wood dust and wood chips in commercial areas is not permitted.
• Operating the machine outdoors.
• Operating the machine without adequate physical and mental fitness.
• Operating the machine without knowledge of the manual.
• Modifying the machine design.
• It is not permitted to operate the machine with materials that are not expressly listed in this
manual.
• Extraction of explosive and harmful media such as flammable gases (e.g. paint or varnish
mist), explosive media, metal parts, solid wooden blocks as well as lath residues.
• Extraction of liquids.
• Extraction of materials above 60° C (e.g. ash or metal chips).
• When cleaning floors, do not vacuum up pieces of wood, metal, stone or similar.
• Operating the machine under fire or explosive conditions (machine can produce ignition
sparks during operation).
• Chip collection bags made of polyethylene must be at least 0.2 mm thick!
• If other bags made of other materials are used, they must have the same mechanical
strength.
• Operating the machine outside the technical limits specified in these operating
instructions.
• Removing of the safety markings attached to the machine.
• Modifying, circumventing or disabling the safety devices of the machine.
• The machine is not designed for continuous operation or unrestricted, commercial
operation and may only be used in dry rooms.
The non-intended use or the disregard of the explanations and instructions described in this
manual will result in the expiration of all warranty claims and compensation claims for damages
against ZIPPER MASCHINEN GmbH.
Bekijk gratis de handleiding van Zipper ZI-ASA550B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Zipper |
| Model | ZI-ASA550B |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 5809 MB |