Zen Living 350163 handleiding
Handleiding
Je bekijkt pagina 23 van 24
If you do not find the cause of the problem, please do not
disassemble the machine and you should contact your
local maintenance agency.
TROUBLE SHOOTING
Malfunction Reason Solution
No display
Check that the plug is in place
and Power button is pressed.
Insert the power plug, make sure you
press the Power button.
The indicator on the front
panel of the machine is
red
The bean box is not installed.
Install bean box
There are water marks on
the bottom of the
machine
The water tank or the water
tray is not installed in place.
The drip tray is full
Make sure that the water tank and the
drip tray are installed in place, and
the drip tray is empty.
If the issue is not solved, please don’t
disassemble the machine on your
own, but send it to local authorized
maintenance center for reparation.
You will hear a ticking
sound after starting the
machine and a hissing
sound after the coffee is
dispensed.
This is a normal phenomenon
and the sound is produced by
the normal operation of the
pressure control valve.
No coffee comes out from
funnel, or coffee does not
come out from funnel
smoothly, or the funnel
cannot be installed in
funnel bracket properly.
Excessive amount of coffee
powder, too fine coffee
powder or excessive pressure
The amount of powder should not
exceed the standard amount. Adjust
the grinding setting of the grinder
appropriately until it is suitable. It
should not be pressed repeatedly
with excessive force when pressing
the powder.
Coffee without crema.
The coffee beans are damp or
the coffee powder is too
coarse.
Choose fresh coffee beans and
powder with moderate grinding
thickness to make coffee.
No steam
The steam function is not
preheated;
The steam nozzle is blocked.
The machine can only produce steam
after the machine is preheated in
steam mode; the machine needs to
be descaled and use a cleaning
needle to clean the steam nozzle.
Can't make coffee or hot
water immediately after
the steam comes out and
the machine will
automatically pump
water.
After steaming is completed,
the pressure needs to be
released to reduce the
temperature. At this time,
other operations cannot be
performed.The water pumping
is used for cooling down the
heating element quickly.
It takes 20-30s to release the
pressure and cool down. After the
pressure is released and the cooling
down is finished, the indicators on the
control panel will work properly, then
you can brew coffee and hot water
normally.
22
Bekijk gratis de handleiding van Zen Living 350163, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Zen Living |
| Model | 350163 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2161 MB |
