Zen Living 350162 handleiding
Handleiding
Je bekijkt pagina 4 van 9
To ensure the first cup of coffee tastes excellent, you should rinse the coffee maker
with warm water as follows:
1.Open water tank cover, fill water into water tank, water level should not exceed the
“MAX” mark in water tank. Then replace the water tank cover.
Note: the appliance is supplied with a detachable water tank for easy cleaning, you
can fill water tank with water first, and then attach water tank into the appliance.
2.Set steel mesh into metal funnel (no coffee in steel mesh), make sure the tube on
the funnel aligns with groove in the appliance, then insert the funnel into the
appliance from the “INSERT” position, and fix them into coffee maker firmly by
turning it anticlockwise until it is at the “LOCK” position.
3.Place a jug on removable cup shelf. Make sure the steam control knob is on the
OFF position.
4.Connect into power source, press power button, power indicator is illuminated
white. The indicators of 1- cup coffee button, 2-cup coffee button, manual coffee
button and steam button flash, the machine begins preheating, after all indicators
are solidly on, the preheating is completed
Note: if preheating is not completed yet, press 1-cup coffee button, 2-cup coffee
button or manual coffee button, the pump does not work;if you want to make steam,
press the steam button.
5.Press Manual coffee button, the unit will pump water for about 30s, pour out water
in the cup then clean them thoroughly, now the appliance is ready for making
coffee.
Note: There may be noise when pumping water for the first time, it is normal that the
appliance is releasing the air inside. After about 20s, the noise will disappear.
BEFORE THE FIRST USE
To make a cup of good hot Espresso coffee, we recommend you should preheat the
appliance before making coffee, including metal funnel, steel mesh and cup, so that
the coffee flavour cannot be influenced by cold parts.
1.Remove detachable water tank and open water tank cover to fill it with desired
water, the water level should not exceed the “MAX” mark in the tank. Then replace
water tank.
2.Set steel mesh into metal funnel, make sure the tube on the funnel aligns with
groove in the appliance, then insert the funnel into the appliance from the
“INSERT” position, and fix them into coffee maker firmly by turning it anticlockwise
until it is at the “LOCK” position.
3.Place an espresso cup on removable cup shelf.
4.Then connect appliance to power supply. Make sure steam control knob is on the
OFF position.
5.Press power button, power indicator is illuminated white, The indicators of 1- cup
coffee button, 2-cup coffee button and manual coffee button flash, the machine
begins preheating, after all indicators are solidly on, it means that preheating is
completed, press Manual coffee button, the machine pumps water, when there is
water flowing out, press this coffee button again to stop pumping water
PREHEATING
3
A. Water tank cover B. Water tank C. Steam control knob
D. Top cover E. Nixie tube
F. Control panel（①1-cup coffee button②2-cup coffee button③Power button
④Manual coffee button⑤Steam button）
G. Measuring spoon H. Steel mesh I. Metal funnel
J. Funnel handle K.Float cover L. Removable cup shelf
M.Drip tray Froth nozzle N. Steam conduit handle O. Steam wand
P. Froth nozzle
Bekijk gratis de handleiding van Zen Living 350162, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Zen Living |
| Model | 350162 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 766 MB |
