Zelmer ZCF7600 handleiding
Handleiding
Je bekijkt pagina 16 van 84
16
PL
EN
INSTALLING THE LED LIGHT KIT AND LAMP SHADE
CAUTION: To reduce the risk of electric shock, disconnect the power supply circuit to the fan before installing the
Light Kit.
1. Loosen the three mounting screws on the mounting ring.
2. While holding the LED Light Kit under the fan motor, pass the light power wire through the hole in the center of
the light kit and plug the light power wire connector into the socket on the lighting kit (Figure 13).
3. Carefully position the 3 screw holes on the Light Kit to match the 3 screw holes on the mounting ring. Secure it
by placing and tightening the three mounting screws (Figure 14).
4. Lift the Lamp Shade against the Light Kit and turn it clockwise until tight, DO NOT OVERTIGHTEN (Figure 15)
REMOTE CONTROLLER INSTRUCTIONS
1. LED indicator light
2. Appliance power o button
3. Light on/o button (Include change the light models)
4. Fan speed buttons (1 min. - 6 max.)
5. Fan on/o button
6. Timer (1h, 4h, 8h)
7. Natural air mode
8. Anti-theft mode
9. Winter/summer mode
10. Silent mode
11. Delayed shutdown
Notes:
3. LED light:
The LED light comes in 3 dierent colors settings: natural, cold and warm. To change the color, turn o the light
and then turn on.
7. Natural Wind Mode:
Press this key and fan speed cycles automatically between 1st to 4th speed every 22 seconds to simulate natural
wind.
8. Anti-theft Mode:
Press the anti-theft button before going out, and it will automatically turn on for about 10 minutes every 4 hours
simulating people inside the house.
9: The fan rotates counterclockwise in summer mode and clockwise in winter mode.
Press the button to switch from one mode to the other. This reverse function allows the blades to rotate in two
directions and makes the ceiling fan move the air to give a cool or warm sensation.
10.Silent Mode:
After pressing this key, the remote control is silenced and no beep is heard. Press again to exit this mode.
11. Delayed shutdown:
Press this key to turn o the fan and lights after 5 minutes.
CLEANING AND MAINTENANCE
Warning: before carrying out regular cleaning operations, disconnect the plug from the mains socket.
• To clean the appliance, use a soft, slightly damp cloth; do not use abrasive or corrosive products.
• Do not immerse any part of the fan in water or any other liquid: if this should happen, under no circumstances
should hands be put into the liquid. First disconnect the plug from the mains socket.
Bekijk gratis de handleiding van Zelmer ZCF7600, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Zelmer |
| Model | ZCF7600 |
| Categorie | Ventilator |
| Taal | Nederlands |
| Grootte | 6458 MB |
