Zelmer Slawek ZVC361 handleiding
Handleiding
Je bekijkt pagina 9 van 56
9
PL
EN
furniture.
VACUUM CLEANER OPERATION
1. Put the end of the suction hose into the inlet opening and press lightly.
2. Attach the other end of the hose (the handle) to the metal telescopic tube.
3. Adjust the length of the telescopic suction tube by sliding the slider according to the arrow and pull out/
pull the tube together.
4. Attach the appropriate nozzle or brush to the other end of the metal telescopic tube.
5. Use 2in1 universal brush (11) for vacuuming both hard surfaces and carpets. To clean hard surfaces
– wooden oors, plastic oors, ceramic tiles etc. pull out the brush by pressing the switch on the brush
(set the switch to the „parquet” position). Retract the brush when vacuuming carpets (set the switch to the
„carpet” position).
6. The vacuum cleaner is equipped with an accessory compartment. In order to open it press the
accessory compartment lid lock button (3).
7. Pull the plug and cord out of the vacuum cleaner (13).
8. Plug the vacuum cleaner into the socket.
Before operation make sure that the dust bag is installed in the vacuum cleaner chamber and that inlet lter
and the outlet lter is installed in the appliance.
9. Switch on the vacuum cleaner by pressing the ON/OFF button (6).
10. The vacuum cleaner is equipped with electronic power regulator. The power regulation is performed with
a slider. Moving the slider according to its mark (plus or minus) will increase or reduce the suction power.
DUST BAG REPLACEMENT
When the dust bag full indicator (4) turns fully red while appliance is turned on and brush or nozzle is raised
above the cleaned surface, it indicates that the dust bag needs to be replaced with a new one.
It is recommended to replace the dust bag also if the safety valve activates (a characteristic “whirr” sound
can be heard inside the vacuum cleaner) or the vacuum cleaner operates poorly.
Do not start cleaning without an installed bag.
1. Switch off the vacuum cleaner by pressing the ON/OFF button (6).
2. Unplug the appliance.
3. Pull the end of the hose out of the inlet opening of the vacuum cleaner.
4. Press front cover lock button (1) and open the front cover (2) by clipping.
5. Take out the dust bag holder then remove the full dust bag.
6. Put ne dust bag into the bag holder and put it inside the vacuum cleaner.
7. Close the front cover (2) until you hear the characteristic clicking sound – be careful not to catch the bag.
Set of replacement bags suitable for this vacuum cleaner: ZVCA333B
FILTER REPLACEMENT
Before changing the lters make sure that the vacuum cleaner is switched off and unplugged from the
mains supply.
INLET FILTER
The inlet lter should be removed and rinsed once a year, and can use it after dry. If the lter is damaged
it should be replaced.
1. Pull the end of the hose out of the inlet opening of the vacuum cleaner.
2. Press front cover lock button (1) and open the front cover (2) by clipping.
Bekijk gratis de handleiding van Zelmer Slawek ZVC361, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Zelmer |
| Model | Slawek ZVC361 |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 5138 MB |
