Zelmer Radek ZVC032P handleiding
Handleiding
Je bekijkt pagina 11 van 64
11
PL
EN
The lter can be cleaned by manually tapping it against the wall of the trash bin.
It can also be cleaned with running water, but then it must be completely dried before reinstalling. The inlet
lter should be removed and rinsed once a year, it can be reused after being completely dried. Do not use
high temperature to dry the lter faster, it may damage it.
8. Put the dust container back inside the vacuum cleaner.
9. Close the front cover (2) until you hear the characteristic clicking sound – be careful not to catch the bag.
If there are contaminants in the container that cannot be removed by opening the bottom lid (14), you can
remove the top lid (12) by unscrewing the screw (13).
FILTER REPLACEMENT
Before changing the lters make sure that the vacuum cleaner is switched off by pressing the ON/OFF
button (4) and unplugged from the mains supply.
DUST CONTAINER EPA FILTER
1. Pull the end of the hose out of the inlet opening of the vacuum cleaner.
2. Press front cover lock button (1) and open the front cover (2) by clipping.
3. Take out the dust container using handle in the lid (12).
4. Remove the EPA lter from the back of the container.
5. Replace lter with a new one if needed.
6. Put the dust container back inside the vacuum cleaner.
7. Close the front cover (2) until you hear the characteristic clicking sound – be careful not to catch the bag.
INLET FILTER
The inlet lter should be removed and rinsed once a year, it can be reused after being completely dried. Do
not use high temperature to dry the lter faster, it may damage it.
If the lter is damaged it should be replaced.
1. Pull the end of the hose out of the inlet opening of the vacuum cleaner.
2. Press front cover lock button (1) and open the front cover (2) by clipping.
3. Take out the dust bag holder or dust container.
4. Remove the sponge lter out of the housing.
5. Replace lter with a new one if needed.
6. Put the bag holder or dust container back into the vacuum cleaner and close the front cover (2).
OUTLET FILTER
The inlet lter should be removed and rinsed once a year, it can be reused after being completely dried. Do
not use high temperature to dry the lter faster, it may damage it.
If the lter is damaged it should be replaced.
1. Press the outlet lter cover (6) latch and remove the cover.
2. Remove the sponge lter out of the housing.
3. Replace lter with a new one if needed.
4. Put back lter cover (6) and close it.
Bekijk gratis de handleiding van Zelmer Radek ZVC032P, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Zelmer |
| Model | Radek ZVC032P |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 5784 MB |
