Zelmer Radek ZVC031P handleiding
Handleiding
Je bekijkt pagina 10 van 64
10
PL
EN
narrow and hard-to-reach areas. When the brush is extended, use it to clean dust from sensitive objects
such as books, picture frames, curtains, etc. Also suitable for cleaning scratch-sensitive surfaces.
VACUUM CLEANER OPERATION
1. Put the end of the suction hose into the inlet opening and press lightly.
2. Attach the other end of the hose (the handle) to the metal telescopic tube.
3. Adjust the length of the telescopic suction tube by sliding the slider according to the arrow and pull out/
pull the tube together.
4. Attach the appropriate nozzle or brush to the other end of the metal telescopic tube.
5. Use 2in1 universal brush (10) for vacuuming both hard surfaces and carpets. To clean hard surfaces
– wooden oors, plastic oors, ceramic tiles etc. pull out the brush by pressing the switch on the brush
(set the switch to the „parquet” position). Retract the brush when vacuuming carpets (set the switch to the
„carpet” position).
6. Pull the plug and cord out of the vacuum cleaner (7).
7. Plug the vacuum cleaner into the socket.
Before operation make sure that the dust bag or dust container is installed in the vacuum cleaner chamber
and that inlet lter and the outlet lter is installed in the appliance.
8. Switch on the vacuum cleaner by pressing the ON/OFF button (4).
9. The vacuum cleaner is equipped with electronic power regulator. The power regulation is performed with
a slider. Moving the slider according to desired direction (MIN for minimum and MAX for maximum) will
increase or reduce the suction power.
DUST BAG REPLACEMENT
When the safety valve activates (a characteristic “whirr” sound can be heard inside the vacuum cleaner)
or the vacuum cleaner operates poorly, it indicates that the dust bag needs to be replaced with a new one.
Do not start cleaning without an installed bag or dust container.
1. Switch off the vacuum cleaner by pressing the ON/OFF button (4).
2. Unplug the appliance.
3. Pull the end of the hose out of the inlet opening of the vacuum cleaner.
4. Press front cover lock button (1) and open the front cover (2) by clipping.
5. Take out the dust bag holder (11) and remove the dust bag.
6. Put the dust bag into the bag holder (11) and put it inside the vacuum cleaner.
7. Close the front cover (2) until you hear the characteristic clicking sound – be careful not to catch the bag.
Set of replacement bags suitable for this vacuum cleaner: ZVCA250BP
DUST CONTAINER CLEANING
When the safety valve activates (a characteristic “whirr” sound can be heard inside the vacuum cleaner) or
the vacuum cleaner operates poorly, it indicates that the dust container must be cleaned. It’s recommended
to clean container after every use.
Do not start cleaning without an installed bag or dust container.
1. Switch off the vacuum cleaner by pressing the ON/OFF button (4).
2. Unplug the appliance.
3. Pull the end of the hose out of the inlet opening of the vacuum cleaner.
4. Press front cover lock button (1) and open the front cover (2) by clipping.
5. Take out the dust container using handle in the lid (12).
6. Place the container over the trash bin and open the bottom lid (14) to clear the container of dirt.
7. Remove the EPA lter from the back of the container, clean it or replace if necessary.
Bekijk gratis de handleiding van Zelmer Radek ZVC031P, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Zelmer |
| Model | Radek ZVC031P |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 5784 MB |
