Zeiss Conquest V6 1.1-6x24 handleiding
Handleiding
Je bekijkt pagina 8 van 70
INSTRUCTIONS FOR USE
ZEISS products are famous for outstanding optical performance, precision
workmanship and a long service life.
Please observe the following instructions for use in order to obtain the best from
your riflescope and to ensure that it remains your constant companion for many
years to come.
Information for your safety
Battery disposal
Batteries do not belong in household rubbish!
Please use a recycling facility in your area to dispose of used batteries.
Please only recycle discharged batteries.
As a rule, batteries are discharged if the device being run
• shuts off and signals “Battery empty”.
• no longer functions properly after extended use of the batteries.
Environmental influences
• Do not under any circumstances look through the riflescope at the sun or laser
light sources! Serious eye injury may otherwise result.
• Never leave the device in the sun for extended periods without the protective lens
cap. The objective lens and eyepiece can function as a burning glass and damage
the interior components.
• Avoid touching the metal surface after exposure to sunlight or cold.
Danger of swallowing
Do not leave the batteries and removable exterior parts within reach of children
(danger of swallowing).
Function
• Before working on the gun-mounted riflescope, always check to ensure that the
weapon is not loaded.
• Be sure to leave sufficient eye relief in the mounted position to prevent injuries.
• Please make sure that the riflescope is functioning properly before use.
• Look through the lens to ensure it provides a clear, undisturbed image.
• It may no longer be properly adjusted due to rough handling.
• Check correct setting of the reticle by test shooting.
Scope of supply
ZEISS Conquest
®
V6 Riflescope with reticle illumination:
Product Order number
Scope of supply
Conquest V6 1.1-6x24 M 52 22 04
Riflescope
Protective cap
Elevation cap
Battery cover
Li battery 3V CR 2032
Optical cleaning cloth
Quick guide
Conquest V6 1.1-6x24 52 22 05
Conquest V6 2-12x50 M 52 22 24
Conquest V6 2-12x50 52 22 25
Conquest V6 2.5-15x56 M 52 22 34
Conquest V6
2.5-15x56 52 22 35
TECHNICAL DATA 1.1-6x24 2-12x50 2.5-15x56
Magnification 1.1 6.5 2 12 2.5 15
Effective lens diameter mm 10.5 24 19.4 50 24.3 56
Exit pupil diameter mm 9.5 3.7 9.7 4.2 9.7 3.7
Twilight factor 3.1 12.5 5.7 24.5 7.1 29
Field of view m/100m 38.1 6.6 20.5 3.4 16.4 2.7
Objective viewing angle ° 21.6 3.8 11.7 2 9.4 1.6
Diopter range dpt -3 / + 2 -3 / + 2 -3 / + 2
Eye relief mm 90 90 90
Parallax-free m 100 100 100
Adjustment range cm/100m 300 250 200
Adjustment per click cm 1 1 1
Centre tube diameter mm 30 30 30
Eyepiece tube diameter mm 45.5 45.5 45.5
Lens tube diameter mm 30 56 62
Coating LotuTec
®
LotuTec
®
LotuTec
®
Nitrogen filling
Waterproof mbar 400 400 400
Operating temperature °C -25 / 50 -25 / 50 -25 / 50
Length mm 285 335 352
Weight without rall mount g 505 620 690
Weight with rall mount g 545 655 725
Subject to changes in design and scope of supply due to technical improvements.
Focusing the reticle
Focusing the reticle is done by turning the eyepiece. (1).
We recommend making this adjustment with a higher magnification level. The reticle
then remains in sharp focus over the entire range of magnification.
Please note that simultaneous focusing of the reticle and the image at high
magnifications and distances significantly less than or more than 100 m is not
possible with ZEISS Conquest V6 series riflescopes, because these are tuned parallax-
free to 100 m.
We recommend using a lower magnification setting for distances significantly less
than 100 m.
Note: A rubber ring (2) is attached to the eyepiece mount.
Changing the magnification
All magnifications, from the lowest to highest magnification level, allow infinitely
variable setting. Change of magnification is done by turning the changer (3) on the
eyepiece support. The magnification levels are marked by numbers and markings.
Note: When using at dusk or at night:
Turn left as far as possible – maximum magnification
Turn right as far as possible – minimum magnification.
The middle magnification is set when the cam of the magnification changer is
pointing upward.
(1)
(3)
(2)
2 | 5 EN
Bekijk gratis de handleiding van Zeiss Conquest V6 1.1-6x24, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Zeiss |
| Model | Conquest V6 1.1-6x24 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12120 MB |
