Zeiss Conquest V4 4-16x50 handleiding
Handleiding
Je bekijkt pagina 14 van 225
14 | 225 EN
Adjustment range
By turning the adjustment knob (6), the optimum sharpness for target distances
of approx. 50 yards / 45.7 m or 10 yards / 10 m, depending on the model, can be
VHWWRLQİQLW\DQGDLPLQJHUURUVGXHWRSDUDOOD[FDQEHDYRLGHG
Mounting default setting
7RHQVXUHWKDWWKHZHDSRQDQGULıHVFRSHZRUNWRJHWKHUSHUIHFWO\DVDVLQJOHXQLW
WKHULıHVFRSHVKRXOGDOZD\VEHPRXQWHGE\DTXDOLİHGJXQVPLWK,QMXULHVWRWKHH\H
UHVXOWLQJIURPWKHULıHVUHFRLOFDQEHDYRLGHGE\SURSHUO\PRXQWLQJWKHULıHVFRSHDW
WKHFRUUHFWGLVWDQFHIURPWKHH\H3URSHUH\HUHOLHIDOVRHQVXUHVWKDWWKHIXOOİHOGRI
view is available.
$OLJQLQJWKH=(,66&RQTXHVW9ULıHVFRSHWRWKHZHDSRQ
$OLJQLQJWKH=(,66&RQTXHVW9ULıHVFRSHWRWKHZHDSRQFRUUHFWLQJGHYLDWLRQVIURP
WKHLPSDFWSRLQWLVVLPSOLİHGYLDWKHFOLFNVWRSVIRUKHLJKWDQGODWHUDODGMXVWPHQWRI
the reticle. Proceed as follows:
a) After unscrewing the protective lens caps (7 or 8), the reticle can be adjusted for
height (9) and laterally (10) with the adjustment knobs. One click corresponds to
an adjustment of 1/4 MOAIRU=(,66&RQTXHVW9ULıHVFRSHV
,IWKHZHDSRQVKRRWVORZLWUHTXLUHVDQXSZDUGFRUUHFWLRQUPLQRWKHU
words turn the adjustment knob (9) counterclockwise.
,IWKHZHDSRQVKRRWVKLJKit requires a downward correction, in other words
turn the adjustment knob (9) clockwise.
,IWKHZHDSRQVKRRWVWRWKHOHIWLWUHTXLUHVDFRUUHFWLRQWRWKHULJKWRLQ
other words turn the adjustment knob (10) counterclockwise.
If the weapon shoots to the right, it requires a correction to the left, in other
words turn the adjustment knob (10) clockwise.
b) After aligning the weapon, pull the knob (9 or 10) up from the locking
mechanism and set the zero mark on the graduated ring (11) to the index
mark (12). Push the knob (9 or 10) down into the locking mechanism.
The index serves as a reference guide for further adjustments to the reticle
(for other distances or loads).
c) Do not forget: screw on the screw cap (7 or 8).
Note: The reticle is set to the middle of the adjustment range and the zero mark
on the adjustment knobs (9 or 10) to the index mark (12) at delivery of your
=(,66&RQTXHVW9ULıHVFRSH)URPWKLVLQLWLDOVHWWLQJDQXSZDUGGRZQZDUG
right or left adjustment is possible for more than half of the adjustment ranges
given in the table.
Note:=(,66&RQTXHVW9ULıHVFRSHVDUHFRQVWUXFWHGVRWKDWHYHQDFRUUHVSRQGLQJ
movement of the reticle is not noticeable to the center of the picture when
adjusting the reticle. The reticle always remains in the center of the image
during all adjustments.
(6)
50 yards / 45,7 m
... ∞
(8)
(9)
(10)
(12)
(11)
(12) (11)
(7)
Bekijk gratis de handleiding van Zeiss Conquest V4 4-16x50, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Zeiss |
| Model | Conquest V4 4-16x50 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 41983 MB |
