Handleiding
Je bekijkt pagina 40 van 344
Controls and Indicators
40
• Green: A data communication operation has not finished, but is not actively being transferred.
• Blinking Green: Data communications are in process.
• Blinking Amber: Out of memory while storing content (formats, graphics, fonts, etc.).
5. Supplies Indicator — Indicates media (label, receipt, tags, transfer ribbon, ribbon cartridge, etc.) status.
• Red: There is a media out condition.
• Blinking Red: Ribbon Out.
• Blinking Red and Amber: Ribbon Cartridge Low (ZD421 Cartridge printers only).
• Blinking Amber: Ribbon In (ZD421 Cartridge printers only) detected while the printer is attempting to
print in direct thermal mode.
6. Network Indicator — Indicates network activity and status.
• Amber: 10 base Ethernet (LAN) connection detected.
• Green: 10/100 Ethernet (LAN) connection detected or when Wi-Fi (WLAN) has a strong signal and
is connected.
• Red: when an Ethernet (LAN) or Wi-Fi (WLAN) fault occurs.
• Blinking Red: during Wi-Fi (WLAN) association.
• Blinking Amber: during Wi-Fi (WLAN) authentication.
• Blinking Green: when Wi-Fi (WLAN) has completed, but has a weak signal.
7. Cancel Button — Cancels print jobs.
• Only functional when the printer is in the Pause state.
• Pressing the Cancel button once causes the printer to cancel printing the next format in the print
buffer.
• Pressing and holding the button for two seconds cancels printing of ALL pending formats.
8. FEED (Advance) Button — Advance a label (print form/format).
• Feed One Label - Pressing (and releasing) the FEED button when the printer is not printing, causes
the printer to advance media one (1) blank form/format length (label, receipt, tag, ticket, etc.).
• Advance Multiple Labels - Pressing and Holding the FEED button when the printer is not printing,
causes the printer to advance labels until released. It finishes advancing to the beginning position of
the next label.
• Reprint Last Label (activated via a SGD command: ezpl.reprint_mode) - The intended purpose of
this feature is to allow reprint of a failed media print. If the printer runs out of media (paper, labels,
transfer ribbon, etc.), then the printer can re-print the last label (print form/format). The print buffer
that stores the print image available for reprint is cleared when the printer gets turned off or is reset.
9. Pause Button — Pauses print and media movement actions.
• Pressing the Pause button will stop print activities and place the printer into a ‘Pause’ state. The
printer will complete printing a label that is printing before it pauses.
• The Pause indicator will display Amber (orange/yellow) to indicate the Pause state.
• Pressing the Pause button while in Pause state will return the printer to normal operation. If printing
a multi label (form/format) job or another print job is waiting to print in the print queue, then printing
will resume print jobs.
Bekijk gratis de handleiding van Zebra ZD620, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Zebra |
| Model | ZD620 |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 67590 MB |
Caratteristiche Prodotto
| Kleur van het product | Black, Grey |
| Gewicht | 1600 g |
| Breedte | 177 mm |
| Diepte | 221 mm |
| Hoogte | 151 mm |
