Handleiding
Je bekijkt pagina 28 van 42
28
Maintenance
This section provides routine cleaning and maintenance procedures.
Cleaning
When you clean the printer, use one of the following supplies that best suits your needs:
You can obtain cleaning supplies at: www.zebra.com/parts
The cleaning process takes just a couple of minutes using the steps outlined below.
Important • Adhesives and media material can over time transfer onto the printer
components along the media path including the platen and printhead. This build-up can
accumulate dust and debris. Failure to clean the printhead, media path and platen roller
could result in inadvertent loss of labels, label jams and possible damage to the printer.
Important • Using too much alcohol can result in contamination of the electronic
components requiring a much longer drying time before the printer will function properly.
Cleaning Supplies Quantity Intended Purpose
Cleaning pens (105950-035) Set of 12 Clean printhead
Cleaning swabs (105909-057) Set of 25 Clean media path, guides and sensors
Area Method Interval
Printhead Let the printhead to cool for a minute, then use a new
cleaning pen to swab the dark line on the printhead. See
Cleaning the Printhead
After every roll
of media.
Platen
Roller
Remove the platen roller to clean. Clean the roller with
99% medical-grade alcohol and a cleaning swabs or
lint-free cloth. See Platen Cleaning and Replacement
As needed.
Media Path Clean with 99% medical-grade alcohol and a fiber-free
cleaning swab. See Media Path Cleaning
Considerations
Exterior Water-dampened cloth.
Interior Gently brush out printer.
Bekijk gratis de handleiding van Zebra ZD120, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Zebra |
| Model | ZD120 |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 3723 MB |
