Zebra 8595 handleiding
Handleiding
Je bekijkt pagina 74 van 108
A - 8 8585/8595 Vehicle-Mount Computer User Guide
Settings
Table A-2
Automatic Switch-off settings
Parameter Description
After-run time
and
Timeout
to terminate programs on
shutdown
If you do not want the computer to shut down immediately after
switching it off using the ignition or power key, but rather it should
remain on for a time, then enter an after-run time (in seconds) here.
Shutdown times
The length of time until shutdown consists of two counters:
1. After-run time
The after-run time begins with the switching off of the ignition. The shut-
down counter is displayed on the monitor (according to the settings). In
this countdown the after-run time is counted downwards. If the after-run
time has elapsed, a message for the shutdown will be displayed in the
Shutdown dialog.
During this time, the computer can be returned to normal operating
status with the ignition.
2. Timeout to terminate programs
Next, all applications are informed that Windows will shutdown.
After this, the timeout begins counting down — but a counter is no
longer displayed in the Shutdown dialog.
Switch-off time In order to allow enough time for the system shutdown after the
program timeout, set the switch-off time to at least 20 s plus the
program timeout. Settings lower than this value will cause a warning to
appear when data is being saved.
Block input if ignition is off If the ignition of the connected vehicle is off, all input to the computer
may be blocked.
Bekijk gratis de handleiding van Zebra 8595, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Zebra |
| Model | 8595 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 13676 MB |
