Zebra 8585 handleiding
Handleiding
Je bekijkt pagina 53 van 108
CHAPTER 6 MAINTENANCE AND
TROUBLESHOOTING
MAINTENANCE AND TROUBLESHOOTING 6
Maintenance
Cleaning the Housing
The housing of the 8585 is best cleaned with a damp cloth.
Do not use compressed air, a high-pressure cleaner or vacuum cleaner, as this can damage the surface.
Using a high-pressure cleaner poses the additional risk of water entering the device and damaging the elec-
tronics or display.
Touchscreen Cleaning
Use neutral detergent or isopropyl alcohol on a clean soft cloth to clean the panel surface.
Prevent using any kind of chemical solvent, acidic or alkali solution.
Troubleshooting
Data Transmission via LAN/Ethernet
If problems occur during data transmission over LAN/Ethernet (e.g. data is lost or not detected), the cause of
these problems may be a cable which is too long.
Depending on the cable layout and interference from the environment, it may be impossible to use the cable
length of 100 m given in the specification (IEEE 802.3 standard).
The solution here is the use of a shorter cable.
WARNING! Danger due to electric shock when cleaning and maintaining the device.
To avoid electric shock, turn the 8585 off and disconnect it from the power supply
before cleaning or maintaining it.
Bekijk gratis de handleiding van Zebra 8585, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Zebra |
| Model | 8585 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 13676 MB |
