YSI MultiLab handleiding
Handleiding
Je bekijkt pagina 8 van 28
Commissioning IDS WA System
8 ba76199e03 08/2018
3.3 Charging the battery with the IDS WA-S Charger
The wireless transmission of sensor data from sensor to meter is only possible if
the battery in the IDS WA-S adapter is charged.
Charge the battery with the IDS WA-S Charger.
The IDS WA-S Charger is used both to charge and store the IDS WA-S adapters
(e.g. overnight). The sensors may remain plugged to the IDS WA-S adapters while
being charged.
3.3.1 Power supply of the IDS WA-S Charger
1 Charging slot for the IDS WA-S adapter
2 LED indicating the operating condition of the IDS WA-S Charger
3 USB-B connection for the power supply of the IDS WA-S Charger
4 Charging contacts for the IDS WA-S adapter
5 Retaining clip for the IDS WA-S adapter
1. Plug the USB plug of the USB cable supplied into the USB connector (3) of the
IDS WA-S Charger.
2. Plug the other USB plug of the cable to the USB connector of the power pack
or to the USB connector (USB 3.0 or higher) of a PC.
The status LED of the IDS WA-S Charger lights up green. The IDS WA-S
Charger is ready for operation.
1
2
4
5
3
Bekijk gratis de handleiding van YSI MultiLab, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | YSI |
| Model | MultiLab |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1943 MB |
